Industrial

The SAA5250 is a CMOS Interface for Data Acquisition and Control (CIDAC) designed for use in conjunction with the Video Input Processor (SAA5230) in a multi-standard teletext decoder.

This file is the instruction manual for the EXAMINER 1000 vibration meter electronic stethoscope

SA2030 is a PCM frame aligner produced by Siemens. It can be used for interfacing between PCM systems operating with different clocks and PCM concentrators and subscriber multiplexers. The device can be used for delay compensation and clock alignment between 2,048MHz PCM- 30 transmission lines and terminating equipment, as well as jitter and drift control within digital networks.

This document describes the features and characteristics of the S29GLxxxM MirrorBit Flash family, including single power supply operation, 0.23 um MirrorBit process technology, SecSi™ (Secured Silicon) sector region, flexible sector architecture, compatibility with JEDEC standards, and performance characteristics.

The RT9177 is a 200mA low dropout and low noise micro-power regulator suitable for portable RF applications. The output voltage accuracy within ±2% and range from 2.4V to 3.2V in 100mV increments could be selected. It is designed for using very low ESR output capacitor. Its output remains stable even in using 1µF ceramic as its output capacitor. Using an internal PMOS as the pass device cause that don’t need extra GND current in heavy load and dropout conditions. In shutdown mode, nearly zero operation current cause the IC is suitable for battery-power devices. Other features including current limiting, over temperature protection and adding a capacitor in bypass pin to improve its noise performance are functional.

This datasheet provides detailed information on the 1.5 watt DIP24 and SMD, Single and Dual Output POWERLINE DC/DC Converters RP1P5-S_DA Series. This series features 2:1 wide input voltage range, 1.5 watts regulated output power, 500VDC isolation, Pi input filter, low ripple and noise, five-sided shield, standard DIP24 and SMD-pinning, 2 year warranty and 55% efficiency.

The RM600DY-66S is a high voltage diode module manufactured by Mitsubishi. Its maximum continuous current is 600A and its maximum reverse voltage is 3300V. It is an insulated type package.