Industrial

This document introduces the features and characteristics of ROHM's products, and provides design support documents and contact information.

This document is a design support document from ROHM Co., Ltd. It introduces the external packaging materials of a certain product and requires a 3D-enabled browser to view. More detailed product information can be obtained by contacting ROHM.

This document describes the features and characteristics of ROHM's products.

This document describes the features and characteristics of ROHM's products.

This document is for TO252, TO252S package dimensions of ROHM company

The REF01 is a precision voltage reference produced by Analog Devices. It has a 10 V output, a maximum error of ±0.3%, a minimum adjustment range of ±3%, excellent temperature stability, low noise, low current consumption, a wide input voltage range, high load driving capability, no external components, short circuit protection, etc. It is suitable for use in DACs and ADCs, portable instruments, motor control, power conversion and medical equipment.

AD9850 is a highly integrated device that uses advanced DDS technology coupled with an internal high speed, high performance, D/A converter and comparator, to form a com- plete digitally programmable frequency synthesizer and clock generator function.

The ADG736L is a low voltage 2.5Ω dual SPDT switch produced by Analog Devices. It is suitable for USB 1.1 signal switching circuits, mobile phones, PDAs, battery-powered systems, communication systems, sample-and-hold systems, audio signal routing, audio and video switching, and mechanical reed relay replacement.

The SSM2402/SSM2412 are dual analog switches designed specifically for high performance audio applications. Distortion and noise are negligible over the full audio operating range of 20 Hz to 20 kHz at signal levels of up to 10 V rms. The SSM2402/SSM2412 offer a monolithic integrated alternative to expensive and noisy relays or complex discrete JFET circuits. Unlike conventional general-purpose CMOS switches, the SSM2402/SSM2412 provide superb fidelity without audio “clicks” during switching. Conventional TTL or CMOS logic can be used to control the switch state. No external components are required.

The document describes the features and characteristics of Analog Devices' TigerSHARC and Blackfin Embedded Processor ADSP-BF536/ADSP-BF537.

This document describes the features and characteristics of ADuC831, including 8-channel 12-bit ADC, dual 12-bit voltage output DACs, on-chip temperature sensor, and voltage reference. The product also features 62KB flash/EE program memory, 4KB flash/EE data memory, and 2304 bytes of data RAM. It utilizes an 8051 core with support for various peripheral interfaces and power modes. It is suitable for applications such as laser power control in optical networking.

The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin selectable gains of –11 dB to +31 dB with a bandwidth of 90 MHz or 9 dB to 51 dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/√Hz and power con- sumption is 125 mW at the recommended ±5 V supplies. The decibel gain is “linear in dB,” accurately calibrated, and stable over temperature and supply. The gain is controlled at a high impedance (50 MΩ), low bias (200 nA) differential inp

The AD1865 is a complete, dual 18-bit digital-to-analog converter (DAC) offering excellent THD+N and SNR performance while requiring no external components. It includes two complete signal channels, providing cophased voltage or current output signals and eliminating the need for output components.

The AD1892 is a complete EIAJ CP-340 (CP-1201), IEC-958, AES/EBU, S/PDIF compatible digital audio receiver and asynchronous sample rate converter. It features status pins and microprocessor interfaces for stand-alone and microcontroller-oriented operation. The product also integrates a channel status buffer and Q-channel subcode buffer, supporting EIAJ CP-2401. With a 20-bit SamplePort® architecture, it provides superb jitter rejection on the input port. The sample rate conversion ranges from 8 kHz to 48 kHz with a 1:5 upsampling range and a 1:0.85 downsampling range. It offers a dynamic range of 120 dB and -113 dB THD+N @ 1 kHz. Additionally, it includes features such as CRC calculation, a four-wire SPI™ compatible serial control port, mute input pin, power-down mode, single +5 V supply, flexible three-wire serial data port with multiple modes (left-justified, right-justified, and I2S-compatible). The AD1892 is widely used in DVD, DAT, MD, DCC, and CD-R recorders and players, computer multimedia products, DAB receivers, and automotive digital audio networks.

This document is a construction analysis report on the Analog Devices ADSP-21062-KS-160 SHARC Digital Signal Processor. The report describes the assembly and die process of the product, and lists some noteworthy issues and features.