Industrial

SSM3K15FS is a Toshiba field-effect transistor suitable for high-speed switching and analog switching applications. It has a compact package suitable for high-density mounting. It has a low ON-resistance, with a maximum of 4.0Ω (@VGS=4V) and 7.0Ω (@VGS=2.5V).

The SS0520 - SS0540 is a surface mount Schottky barrier diode produced by Won-Top Electronics. It features low turn-on voltage, fast switching, PN junction guard ring, and is designed for surface mount applications.

The SP6200 and SP6201 are CMOS LDOs designed to meet a broad range of applications that require accuracy, speed and ease of use. These LDOs offer extremely low quiescent current which only increases slightly under load, thus providing advantages in ground current performance over bipolar LDOs. The LDOs handle an extremely wide load range and guarantee stability with a 1µF ceramic output capacitor. They have excellent low frequency PSRR, not found in other CMOS LDOs and thus offer exceptional Line Regulation. High frequency PSRR is better than 40dB up to 400kHz. Load Regulation is excellent and

The SP5658 is a single chip frequency synthesiser designed for tuning systems up to 2.7GHz. The RF preamplifer contains a divide by two prescaler which can be disabled for applications up to 2GHz so enabling a step size equal to the comparison frequency up to 2GHz and twice the comparison frequency up to 2.7GHz. Comparison frequencies are obtained either from a crystal controlled on–chip oscillator or from an external source. The device contains two switching ports, in the 14 pin version and four in the 16 pin, together with an ‘‘in–lock” flag output. The device also contains a varactor line disable and charge pump disable facility.

The SP4415 is a DC-AC converter from Sipex Corporation. It can convert input voltage as low as 2.2V to any of four AC voltage levels which can be set via external switch. It features high impedance clock input and signal conditioner, and requires only one external inductor.

SN54AHCT125 and SN74AHCT125 are quad bus buffer gate circuits with independent 3-state outputs. The outputs can be disabled when closed. When closed, the output can receive high or low voltage.

SNC109 is a single-channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port, two 4-bit I/O ports. By programming through the tiny controller in SNC109, user’s varied applications including voice section combination, key trigger arrangement, output control, and other logic functions can be easily implemented.

The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 are high-output RS-485 transceivers from TI. The features are differential output voltage greater than standard 2.5V, open-circuit, short-circuit, idle bus fault detection function, support 1/8 unit load mode, ESD protection exceeding 16kV HBM.

This data sheet provides detailed information on the SN54HC165 and SN74HC165, including pinout, package, functions, specifications, and ordering information.

The SCDS122A is a bidirectional data transmitter produced by Texas Instruments. It has the characteristics of low voltage difference, low power consumption, low temperature drift and small packaging.

The SN74ALVC125 is a four-channel bus buffer gate manufactured by TI. It operates at voltages from 1.65 V to 3.6 V and features three independent line drivers with three-state outputs. When the output enable (OE) input is high, each output is disabled.

SN74ALVC00 is a four-way 2-input positive NAND gate produced by Texas Instruments

This document introduces the LTC4413 dual monolithic ideal diode, which helps to reduce the size and improve the performance and reliability of handheld battery-operated devices. The device can automatically select and isolate up to three power sources, such as a wall adapter, an auxiliary supply and a battery. It provides a low loss automatic PowerPath TM management solution for demanding applications that may require short-circuit protection, thermal management and system-level power management and control. The LTC4413 contains two isolated low voltage (2.5V to 5.5V) monolithic ideal diodes. Each ideal diode channel provides a low forward voltage drop (typically as low as 40mV when conducting low current) and a low RDS(ON) (below 100mΩ) when conducting high current—features that are important to extend battery life and reduce heat in portable applications. Furthermore, each channel is capable of providing up to 2.6A of continuous current from a small 3mm × 3mm, 10-pin DFN package. Current-limit and thermal shutdown features further enhance system reliability.

This design note introduces Linear Technology's LT ®3471 space saving and extremely versatile dual switching regulator available in a tiny 3mm × 3mm DFN package. The device can easily implement any combination of boost, inverting and SEPIC topologies to generate two positive and/or negative outputs up to ±40V. It can readily make the two output voltages track each other with minimal additional circuitry, or it can independently regu- late the outputs, thus saving space by replacing two separate ICs. Either way, the LT3471 fits into tight spaces and is easily adaptable for a wide range of applications.