Industrial

The OPA131, OPA2131 and OPA4131 series are low cost, high performance FET input operational amplifiers. Single, dual and quad versions with industry standard pinouts provide cost-effective design options. The OPA131 series offers excellent general purpose performance, including low offset voltage, drift, and good dynamic characteristics. Single, dual and quad versions are available in DIP and SOIC packages. Performance grades include industrial and commercial temperature ranges.

The OPA130 series of FET-input op amps combine precision dc performance with low quiescent current. Single, dual, and quad versions have identical specifications for maximum design flexibility. They are ideal for general-purpose, portable, and battery operated applications, especially with high source impedance. OPA130 op amps are easy to use and free from phase inversion and overload problems often found in common FET-input op amps. Input cascode circuitry provides excellent common-mode rejection and maintains low input bias current over its wide input voltage range. OPA130 series op amps are stable in unity gain and provide excellent dynamic behavior over a wide range of load conditions, including high load capacitance. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded. Single and dual versions are available in 8-pin DIP and SO-8 surface-mount packages. Quad is available in 14-pin DIP and SO-14 surface-mount packages. All are specified for –40°C to +85°C operation.

OPA129 is an ultra-low bias current monolithic operational amplifier produced by Burr-Brown. It features dielectrically-isolated FET (Difet®) inputs, which can achieve a high performance level.

OPA128 is a low bias current monolithic operational amplifier produced by Burr-Brown. It features ultra-low bias current, low input offset voltage, low drift, etc. It is suitable for electrometers, mass spectrometers, chromatographs, ion gauges, photodetectors, and radiation-hardened equipment.

The OPA124 is a precision monolithic FET operational amplifier using a Difet (dielectrical isolation) manufacturing process.

OPA121 is a precision monolithic dielectrically- isolated FET (Difet ®) operational amplifier. Out- standing performance characteristics are now available for low-cost applications. Noise, bias current, voltage offset, drift, open-loop gain, common-mode rejection, and power supply rejection are superior to BIFET® amplifiers. Very low bias current is obtained by dielectric isolation with on-chip guarding. Laser-trimming of thin-film resistors gives very low offset and drift. Extremely low noise is achieved with new circuit design techniques (patented). A new cascode design allows high precision input specifica- tions and reduced susceptibility to flicker noise. Standard 741 pin configuration allows upgrading of existing designs to higher performance levels.

The document describes the features and characteristics of a low noise precision differential field effect transistor operational amplifier.

The datasheet provides detailed information on 59 models of PC board power supplies, including model, input voltage range, power factor, output voltage range, cooling method, operating ambient temperature, withstand voltage, safety standard, CE marking, EMI, immunity, PFHC and function.

The ZXRE125 is a bandgap circuit designed to achieve a precision micropower voltage reference of 1.22 volts. The device is available in the small outline SOT23 surface mount package which is ideal for applications where space saving is important. SOT23 tolerance is available to 0.5% for precision applications. Excellent performance is maintained over the 30µA to 5mA operating current range with a typical temperature coefficient of only 20ppm/°C. The device has been designed to be highly tolerant of capacitive loads so maintaining excellent stability. This device offers a SOT23 pin for pin compatible replacement of the ZRA124 and ZRA125 series of voltage references. SO8 and E-Line (TO92 style) packages can also be made available.

The ZXRE1004 is a 1.22 volt bandgap reference circuit designed for ultra low current operation, typically 4μA. The device is available in a SOT23 surface mount package offering the ultimate in space and power saving. These features make the ZXRE1004 particularly suitable for portable and battery powered applications. SOT23 tolerance selection is available to 0.5% for precision applications. Excellent performance is maintained over the 8μA to 20mA operating current range with a typical temperature coefficient of only 20ppm/°C. The device has been designed to be highly tolerant of capacitive loads so maintaining excellent stability. As well as the SOT23, the ZXRE1004 can offer a pin for pin compatible alternative to the REF1004, LT1004 and LM185/385 series of voltage references with SO8 and E-Line (TO92 style) equivalents.

The document describes the ZXRD1000 series of high-efficiency DC-DC converter solutions. The product features include > 95% conversion efficiency, fixed frequency PWM, voltage mode, low quiescent current, low battery flag, overload protection, etc. It is suitable for applications such as high-efficiency 5 to 3.3V converters, sub-notebook computers, embedded processor power supplies, distributed power supplies, portable instruments, GPS systems, etc.

IRF244, IRF245, IRF246, IRF247 are N-Channel enhancement mode silicon gate power field effect transistors, features include 14A and 13A, 275V and 250V, rDS(ON) = 0.28Ω and 0.34Ω, Single Pulse Avalanche Energy Rated, SOA is Power Dissipation Limited, Nanosecond Switching Speeds, Linear Transfer Characteristics, High Input Impedance, 275V, 250V DC Rated - 120V AC Line System Operation