Industrial Manuals

This document is the datasheet of U74LVC2G240. U74LVC2G240 is a dual buffer or driver with 3-state outputs produced by UNISONIC TECHNOLOGIES CO., LTD. It is designed for 1.65V to 5.5V operation. U74LVC2G240 consists of two 1-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, data passes from A (input) to Y (output). When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor, and the minimum value of the resistor is determined by the current-sinking capability of the driver. U74LVC2G240 is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs and prevents damaging current backflow through the device when it is powered down.

Introduces two 8-bit serial-in parallel-out shift registers, CD54HC164 and CD54HCT164, with asynchronous reset. They support HC and HCT logic levels and can operate in a wide temperature range of -55°C to 125°C.

M54/74HCT02 is a high performance, low power CMOS quad 2-input NOR gate with fully compatible with 54/74 LSTTL logic family

The HC138/HC238/HCT138/HCT238 are high speed silicon gate CMOS decoders well suited to memory address decoding or data routing applications. The HC138 and HC238 feature low power consumption typically associated with CMOS circuitry, yet have speeds comparable to low power Schottky TTL logic. The HC/HCT138 series has eight normally high outputs, of which, if the device is enabled, these inputs determine which one will go low or which of the normally low outputs of the HC/HCT238 series will go high. Two active low and one active high enables (E1, E2 and E3) are used to simplify cascading.

M54HC02 M74HC02 is a high performance CMOS four-input NOR gate with a working voltage range of 2V to 6V, low power consumption, high noise immunity and stable output.

This document describes the features and characteristics of Harris CD74HC283 and CD74HCT283 binary full adders, including adding two 4-bit binary numbers, full internal lookahead, fast ripple carry for economical expansion, operation with both positive and negative logic, wide operating temperature range, balanced propagation delay and transition times, significant power reduction compared to LSTTL logic ICs, etc.

The CD74HC374 is an octal D-type flip-flop with three-state outputs from Harris, which can drive 15 LSTTL loads. The input interface of the trigger has buffer function, the output interface has three-state output enable control, and can output high impedance state on the output pin.

Shanghai Barcode Network is a company that provides barcode-related products and solutions. They offer barcode printers, label printers, barcode scanners, and other products. One of their products is the Ring 4012PMH, a high-definition industrial barcode printer from a famous Japanese brand. It has a 300dpi printing resolution and a maximum printing speed of 152mm/s. The printer is suitable for industries such as instant label printing, bulk product label printing, transportation, distribution, logistics labels, railways, airports, stations, ticket printing, clothing hang tags, garment washing labels, postal hang tags, etc.

The HY 5-P is an alternating current current sensor produced by Hirschmann, with a rated current of 5A and a measurement range of 5-15A. It provides a 15V supply voltage and an output voltage range of -4V to 4V.

The SF-0603S series is a slow-blow surface mount fuse, UL listed, RoHS compliant* and halogen free**. Thin film chip fuse for automated assembly.

The TISP7015 is a three-terminal overvoltage protector designed to protect signal, data, and control lines from overvoltage. It has low capacitance and stable voltage protection characteristics, suitable for applications such as ISDN, T1/E1, RS232, and RS485.

3313-3mm trimming potentiometer electrical characteristics, environmental characteristics, physical characteristics

This PDF document describes the features and characteristics of the SMD switching diodes BAS16W/BAV70W/BAW56W/BAV99W produced by Formosa MS, including fast switching speed, general purpose switching application, high conductance, etc. It also provides information on maximum ratings, pinning information, marking, suggested solder pad layout, and more.

The ADC082S051 is a low-power, two-channel CMOS 8-bit analog-to-digital converter (ADC) with a high-speed serial interface. Unlike the conventional practice of specifying performance at a single sample rate only, the ADC082S051 is fully specified over a sample rate range of 200 kSPS to 500 kSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept one or two input signals at inputs IN1 and IN2. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROWIRE, and many common DSP serial interfaces. The ADC082S051 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 2.2 mW and 7.1 mW, respectively. The power-down feature reduces the power consumption to just 0.12 µW using a +3V supply, or 0.35 µW using a +5V supply. The ADC082S051 is packaged in an 8-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.