Industrial Manuals

The AD215 is a wideband, low distortion, isolation amplifier with a 120 kHz bandwidth and -80 dB @ 1 kHz low harmonic distortion.

The AD202 and AD204 are general purpose, two-port, transformer-coupled isolation amplifiers that may be used in a broad range of applications where input signals must be measured, processed, and/or transmitted without a galvanic connection. These industry standard isolation amplifiers offer a complete isolation function, with both signal and power isolation provided for in a single compact plastic SIP or DIP style package. The primary distinction between

The ADL5513 is a 1 MHz to 4 GHz, 80 dB logarithmic detector/controller. It features wide bandwidth, 80 dB dynamic range, constant dynamic range, -40oC to +85oC temperature range stability, -70 dBm sensitivity, low noise measurement/controller output (VOUT), 21 ns/20 ns pulse response time (fall/rise), single supply operation (2.7V to 5.5V @ 31 mA), power down feature (1 mW @ 5V), small footprint LFCSP and high speed SiGe process. It can be used for RF transmitter power amplifier linearization and gain/power control, power monitoring in radio link transmitters, RSSI measurement in base stations, WLAN, WiMAX, RADAR.

This datasheet provides the features and specifications of 1 MHz to 10 GHz, 62 dB Dual Log Detector/Controller ADL5519.

The AD8317 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a DC output voltage. It can be applied to RF transmitter PA setpoint control and level monitoring, power monitoring in radio link transmitters, RSSI measurement in base stations, WLANs, WiMAX, and radars.

The AD8319 is a demodulating logarithmic amplifier that accurately converts an RF input signal to a DC output proportional to the input power. The device features a wide bandwidth of 1 MHz to 10 GHz and a dynamic range of 45 dB, making it suitable for RF transmitter PA setpoint control and level monitoring, power monitoring in radiolink transmitters, RSSI measurement in base stations, WLANs, WiMAX, and radars.

The AD8311 is a complete low cost subsystem for the precise control of RF power amplifiers operating in the frequency range 0.1 GHz to 2.5 GHz and over a typical dynamic range of 50 dB. It is intended for use in cellular handsets and other battery-operated wireless devices.

The AD8318 is a wideband, high-accuracy, low-noise RF power detector that provides power monitoring and power control functions.

The AD8302 is a fully integrated system for measuring gain/loss and phase up to 2.7 GHz. It includes dual demodulating log amps and a phase detector, with an input range of -60 dBm to 0 dBm in a 50 ohm system. It provides accurate gain measurement scaling (30 mV/dB) and phase measurement scaling (10 mV/degree), with typical nonlinearities of less than 0.5 dB and 1 degree, respectively. It is suitable for RF/IF power amplifier linearization, precise RF power control, remote system monitoring and diagnostics, return loss/VSWR measurements, and log ratio function for AC signals.

The AD8315 is a complete RF detector/controller function for precise control of RF power amplifiers operating in the frequency range of 0.1 GHz to 2.5 GHz and over a typical dynamic range of 50 dB. It is intended for use in cellular handsets and other battery-operated wireless devices.

The AD8310 is a fast, voltage-output DC to 440 MHz, 95 dB logarithmic amplifier. It features a multistage demodulating logarithmic amplifier, voltage output, rise time less than 15 ns, high current capacity, and a 95 dB dynamic range.

The AD8306 is a complete IF limiting amplifier, providing both an accurate and stable RSSI scaling over temperature and supplies. It has a dynamic range of 100 dB and is suitable for applications such as receivers for frequency and phase modulation, very wide range IF and RF power measurement, and receiver signal strength indication (RSSI).

The AD8309 is a 100 dB dynamic range, single supply, high gain, low noise, low distortion, low power multistage log-limiter amplifier, which supports frequency and phase modulation applications. It has fixed phase, wide bandwidth, low input impedance and high output current.