SCHURTER Manuals

The 4740 / 4760 series Stripbloc are stand alone Distribution Units, available as class I, made for pin temperature max. 70°C, L and N shuttered. The Stripbloc is designed to enable up to 6 low power appliances to be connected simultaneously. Variations of distribution units type 4740/4760: - All versions available with IEC-inlet or country specific cables. - Distribution unit with 6 outlets. - Distribution unit with 5 outlets, fuseholder and neon. - Distribution unit with 3 outlets, fuseholder and neon. - Distribution unit with 2 outlets, fuseholder and neon. - Distribution unit with 1 outlet, fuseholder and neon. - Filter type distribution unit with IEC-inlet.

This document describes the application field and function of Schurter's line filters. Line filters eliminate or minimize interference to guarantee the function of electronic equipment.

MSTU 250 is a non-resettable fuse from Schneider Electric. It has a rated voltage of 250VAC, a rated current of 0.063-10A and a breaking capacity of 50A. It has low breaking capacity, can be directly soldered on printed circuit boards and complies with UL 248-14 and CSA C22.2 no. 248.14 standards.

This document introduces a series of fuses from Stac Electronics. Including MSA, MGL, MSF, MST/MXT, FRT, OSU, OMT, MSU, FSU/SSU, SA/SP/SPT/FSM, FSF/FST/FTT/FSM etc. These fuse products have different rated current, rated voltage, action characteristics, through terminals and other characteristics.

This PDF file introduces Schurter's range of audio, DC and DIN connectors, which are cost-effective and suitable for a wide range of applications. The range includes 2.5mm, 3.5mm and 6.3mm audio plugs and sockets, low voltage DC plugs and sockets rated at 12V DC 0.5A, 5.5x2.1mm/5.5x2.5mm, 13.5V DC 2A, JSBP4 and 18V DC 2A, JSBP5. Miniature circular DIN plugs and sockets 3 to 8 poles. All these ranges of plugs are rewirable and the sockets are fitted with solder or PCB tabs. These cost-effective connectors are designed and manufactured using dry assembly techniques, comply with Japanese and Asian standards, and are widely compatible with connectors fitted on consumer and industrial products used worldwide.

Schurter's range of audio, DC and DIN connectors offers a cost effective solution for a wide range of applications. The range features 2.5mm, 3.5mm and 6.3mm Audio plugs and sockets. Low voltage DC plugs and sockets rated at 12V DC 0.5A for 5.5x2.1mm/5.5x2.5mm, 13.5V DC 2A for JSBP4 and 18V DC 2A for JSBP5. Miniature circular DIN plugs and sockets 3 to 8 pole. Plugs for all these ranges are rewirable and the sockets are fitted with solder or PCB tabs. These cost effective connectors are designed and manufactured using dry assembly techniques. They comply with Japanese and Asian standards and are widely compatible to connectors fitted on consumer and industrial products, used worldwide.

The AS168X is a high-performance thermal magnetic CBE that is able to dramatically reduce the through current during short-circuit tripping. The series is available in versions with one to four protected poles that can be used in AC or DC networks. Multipole CBEs are mechanically connected internally and at the toggle lever to ensure simultaneous switching. This also applies to a combination with the switchable neutral pole. Cleverly designed Lift terminals on the input and output side enable convenient grid and load connection. The terminals are suitable for connecting conductors with a cross section of 1.5 to 25 mm2 (AWG #16.4). The AS168X can be used as a device protection switch according to UL 1077 / EN 60934 or as a motor protection switch according to UL 508 or CSA 22.2 14. The switch is therefore versatile and suitable for the following functions: • Motor overload protection (thermal and magnetic) • Motor starting across-the-line (direct-on-line) • Motor starting with motor disconnect (cos phi 0,4 – 0,5) • Motor group installation (short capacity 5 kA) • Control circuits

IEC Appliance Connector C20, 70°C 4798 is a panel mount inlet with solder terminals or quick connect terminals. The connector is rated for 16 A/250 VAC; 50 Hz and 20 A/250 VAC; 60 Hz and has an IP40 rating.

1 POWER ENTRY MODULES WITHOUT LINE FILTER 44770077 www.schurter.com Power entry modules, without line filter, with slotted screw type fuseholder meeting IEC/EN 60601-1 medical standard. This product can operate normally in a temperature range of -25°C to 70°C.

This product is a 10A / 250 VAC; 50 Hz IEC certified power entry module with 3 functions: connector, protection class I, line switch 2-pole, fuseholder.

The product is 1 POWER ENTRY MODULES WITHOUT LINE FILTER 44771199, with fuse holder and neon indicator, protection class I, with 5 x 20 mm 1-pole fuse, with soldered terminals 3.8 x 0.8 mm, with internal connections, except neon indicator to allow for different configurations. Neon indicator with wire terminals. Meets the requirements of medical standard IEC/EN 60601-1. The fuse drawer can only be opened with the aid of a tool. The fuseholder is accessible from the equipment front. Qualified for use in equipment according IEC/EN 60950.

The Minibloc 4747 is a product in the 4747 series. It is a distribution unit with 2 functions, 4 outlets, inlet and 70°C pin temperature, protection class I.

This document is about a technical specification for a Schurter Fingergrip Panel Mount, Snap-In 5 x 20 mm. It details the product's features and characteristics, including its dimensions, mounting method, protection class, rated voltage, rated current, rated power, ambient temperature range, and product marking.

schurter 6100-3 IEC connector, suitable for 70℃ environment, rated current 10A, rated voltage 250VAC, UL/CSA certified, RoHS certified

Schurter FFKKHH is a 1 POWER ENTRY MODULE WITH LINE FILTER with 4 functions: Connector Protection class I, Line switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1-pole, Line-filter in standard version