Phoenix Contact Manuals - Page 10

Phoenix Contact manuals, page 10

• PHOENIX CONTACT QC 1 5/ 2-ST Order No.: 1717961 The figure shows a 10-position version of the product handbook

  This document presents the technical and commercial data of the plug component produced by Phoenix Contact, including rated current, rated voltage, dimensions, etc.

• PHOENIX CONTACT - SPC 5/ 5-STCL-7 62 handbook

  This document describes the features and characteristics of the plug component SPC 5/ 5-STCL-7,62 from PHOENIX CONTACT GmbH & Co. KG, including nominal current, nominal voltage, connection type, color, etc.

• PHOENIX CONTACT FMC 1 5/ 8-ST-3 5 Order No.: 1952322 The figure shows a 10-position version of the product handbook

  FMC 1,5/ 8-ST-3,5 is a plug component from PHOENIX CONTACT. Its rated current is 8 A, rated voltage is 160 V, pitch is 3.5 mm, number of positions is 8, connection type is spring cage conn., and color is green.

• PHOENIX CONTACT GMSTB 2 5/ 2-ST-7 62 Order No.: 1766990 The figure shows a 10-position version of the product handbook

  GMSTB 2,5/ 2-ST-7,62 is a plug component manufactured by PHOENIX CONTACT. Its rated current is 12 A, rated voltage is 400 V, pitch is 7.62 mm, number of positions is 2, connection type is screw connection, and color is green.

• PHOENIX CONTACT - FKC 2 5/ 3-ST-5 08 handbook

  The product is the FKC 2,5/ 3-ST-5,08 connector from PHOENIX CONTACT, with a rated current of 12A, rated voltage of 250V, pitch of 5.08mm, spring-cage connection and green color.

• PHOENIX CONTACT MCDN 1 5/ 4-G1-3 5 P26THR Order No.: 1953732 The figure shows a 10-position version of the product handbook

  MCDN 1,5/ 4-G1-3,5 P26THR is a product of PHOENIX CONTACT, with a nominal current of 8 A, a nominal voltage of 160 V, a pin pitch of 3.5 mm, 4 pins, a color of black, and a SMD/THT/THR package.

• PHOENIX CONTACT -PC 35 HC/ 2-STF-15 00 handbook

  The PC 35 HC/ 2-STF-15,00 is a plug-in component from PHOENIX CONTACT with a rated current of 125 A, a rated voltage of 1000 V, a pitch of 15 mm, 2 connection terminals, a screw connection and a green color.

• PHOENIX CONTACT FKC 2 5/ 4-STF-5 08 handbook

  The document provides information about the features and characteristics of the FKC 2,5/ 4-STF-5,08 plug component produced by PHOENIX CONTACT GmbH & Co. KG. The plug component has a nominal current of 12A and a nominal voltage of 250V. It has a pitch of 5.08mm and 4 positions. The connection type is spring-cage connector, and the color is green. The product is WEEE/RoHS-compliant.

• PHOENIX CONTACT PT 1 5/ 5-5 0-V Order No.: 1935349 The figure shows a 10-position version of the product handbook

  This document introduces a PC terminal block with a nominal current of 17.5A, nominal voltage of 250V, 5 positions, screw connection, soldering assembly, 90° conductor/PCB connection direction, and green color. In addition, it is also possible to connect a 1.5mm² conductor with ferrule, but there will be a reduction in rated voltage or pollution degree/surge category.

• PHOENIX CONTACT Motor Terminal Block ST 4-PE/3L handbook

  The ST 4-PE/3L is a Phoenix Contact four-level spring cage terminal block for conductor cross sections up to 4 mm2. Like the 2.5 mm2 version, it is also possible to wire three phases and the PE in one terminal block. The PE contact to the DIN rail is established by simply snapping it on. The ST 4-PE/3L is therefore particularly suited for space-saving wiring of three-phase motors. The nominal conductor cross section of 4 mm2 can also be connected without problems even when ferrules are used. With 28 amps per conductor, a nominal voltage of 800 V, and a width of a mere 6.2 mm, this terminal block is ideal for applications in the Þeld of drive and conveyor engineering. The ST 4-PE/3L can also be labeled and tested at every terminal point. The easy-to-read labeling in the terminal center makes it much simpler to clearly determine which load circuit it belongs to.

• PHOENIX CONTACT PLH 16/ 5-15 Order No.: 1770568 handbook

  PHL 16/ 5-15 is a PC terminal block from PHOENIX CONTACT with a rated voltage of 1000 V, a pitch of 15 mm, 5 positions, spring-cage connection type, soldering assembly, conductor/PCB connection direction of 0°, and green color.

• PHOENIX CONTACT - MC 1 5/ 6-STF-3 81 handbook

  MC 1,5 / 6-STF-3,81 is a plug component with 8A rated current, 160V rated voltage, 3.81 pitch, 6 positions, screw connection, green color, produced by PHOENIX CONTACT.

• PHOENIX CONTACT -MPT 0 5/ 2-2 54 handbook

  MPT 0,5/ 2-2,54 is a printed circuit terminal block produced by PHOENIX CONTACT, with a rated current of 6 A, a rated voltage of 63 V, a pitch of 2.54 mm, 2 positions, a mounting method of soldering, a connection method of screw connection, and a connection direction from the conductor to the PCB of 0°.

• PHOENIX CONTACT SMKDSN 1 5/ 9-5 08 Order No.: 1869282 The figure shows a 10-position version of the product handbook

  This document is about the SMKDSN 1,5/ 9-5,08 product produced by PHOENIX CONTACT GmbH & Co. KG. The product is a 9-position connector with a rated current of 13.5 A, a rated voltage of 250 V, a pitch of 5.08 mm and a green color.

• PHOENIX CONTACT FRONT-MSTB 2 5/ 6-STF-5 08 handbook

  FRONT-MSTB 2,5/ 6-STF-5,08 is a connector produced by PHOENIX CONTACT GmbH & Co. KG. Its rated current is 12 A, the rated voltage is 250 V, the pitch is 5.08 mm, the number of positions is 6, the connection type is screw connection, and the color is green.