Microsemi Manuals - Page 5

Microsemi manuals, page 5

• Microsemi CPT30035 Data Sheet

• Microsemi ISO 9001 CERTIFIED

  This datasheet provides detailed information on the characteristics and features of the CHF1.5KE6.8 to CHF1.5KE400CA series, which are flip-chip packaged TVS diodes with a maximum forward voltage drop of 6.8V to 400V, a maximum reverse breakdown voltage of 400V, a maximum non-repetitive peak power of 1500W, a reverse recovery time of 1X10-12, a forward recovery time of 1X10-9, a total continuous power dissipation of 2.5W, and a weight of 0.3 grams.

• Microsemi LX7201-xx Data Sheet

  The LX7201 is an integrated Universal Serial Bus (USB) line termination device with an EMI filter and ESD protection diodes. This device offers a cost effective and compact solution for one USB downstream port. The USB specification requires line termination resistors on both the D+ and D- lines. These resistors ensure signal integrity by matching the cable impedance to that of the differential driver. The 15KΩ pull-down resistors identify the line as a downstream connection. The 47 pF capacitor completes the high frequency filter and controls the edge rate of the USB signals. The LX7201 protects both D+ and D- data lines and the voltage bus from ESD. The TVS protection diodes exceed the requirements of IEC61000-4-2, level 4, 15kV (air discharge) and 8kV (contact discharge). The integrated configuration of the LX7201 minimizes board space and allows for ideal placement near the connector. The LX7201 is ideal for use in USB hubs, peripherals and portable appliances.

• microsemi HIGH VOLTAGE PIN DIODES GC4400 series

  The GC4400 series are high voltage, high power (cathode base) PIN diodes. These high resistivity silicon devices are passivated with silicon dioxide for high stability and reliability and have been proven by thousands of device hours in high reliability systems. Each device can withstand storage temperatures from -65° to +200°C and will operate over the range from -55° to +150°C. All devices meet or exceed military environmental specifications of MIL-S-19500. The GC4400 series will operate typically with +50 mA forward bias. Breakdown voltages are available up to 1000 volts.

• Microsemi 1N5985 thru 1N6031-1 DO-35 Axial-Leaded 500 mW Zener Diodes handbook

  This document provides specifications of 1N5985 to 1N6031 series of 0.5 watt Zener Voltage Regulators, including voltage, package, rated power, applications, features, etc.

• Microsemi Axial-Leaded 500 mW Zener Diodes 1N5985 thru 1N6031-1 DO-35 handbook

  The popular 1N5985 thru 1N6031 series of 0.5 watt Zener Voltage Regulators provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-35 Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications.

• Microsemi 1N5913B thru 1N5956B

  1N5913 is a silicon diode produced by Infineon with a single pass, rated power of 0.2W, rated current of 1A, rated voltage of 50V, and reverse breakdown voltage of 100V.

• Microsemi 1N2970 thru 1N3015B 1N3993 thru 1N4000A 10 WATT ZENER DIODES

  10 W Zener diodes provide voltage regulation over a broad range of voltages from 3.9 V to 200 V for a variety of applications, including power supplies and circuit protection. These high power Zener diodes are JEDEC registered and are available in standard and reverse polarity.

• Microsemi M*5283 thru M*5314 C+5283 thru C+5314 handbook

• Microsemi MLL5221 thru MLL5281

• Microsemi DO-35 Glass Package Silicon Rectifier Diodes Use Advantages

  This product is a 600 mWatt DO-35 glass package silicon rectifier diode with a working temperature range of -65 to 175 oC and high surge current capability. It can be used in harsh environments such as military and aerospace.

• Microsemi 1N6267 thru 1N6303A 1.5KE6.8 thru 1.5KE400A

  1N6267-1N6303A 1.5KE6.8-1.5KE400A are Microsemi's TVS series, which provides various voltage ranges from 6.8V to 400V and can protect DC, AC and pulse surges.

• Microsemi TGL41-6.8 thru TG41-200CA Data Sheet

  This series of 500 W Transient Voltage Suppressors (TVSs) provides the highest level of Peak Pulse Power (PPP) in the industry for the DO-213AB size MELF package.

• Microsemi SML 5.0 thru 170.0 Volts Data Sheet

• Microsemi 2N3498 Data Sheet

  2N3498 is a NPN silicon transistor with a maximum collector-emitter voltage of 100 volts, a maximum collector-base voltage of 100 volts, a maximum emitter-base voltage of 6 volts, a maximum collector current of 500 milliamps, and a maximum total power dissipation of 1 watt. It comes in TO-5 and TO-39 packages.