The F5CP/F6CP series of SAW band pass filters have 2.5 mm × 2.0 mm × 0.9 mm (h) of ultra small package, which are available in the 700 to 2000 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G.
This datasheet is about MBM29PDS322TE/BE, which is a 32M-bit, 1.8 V-only Flash memory. It is organized as 2M words of 16 bits each. The device provides 63-ball FBGA package. The device is designed to be programmed in system with standard system 1.8 V VCC supply. Write or erase operations do not require 12.0 V VPP and 5.0 V VCC. The device can also be reprogrammed in standard EPROM programmers. The device is organized into two banks, Bank 1 and Bank 2, which can be considered to be two separate memory arrays as far as certain operations are concerned. This device is the same as Fujitsu's standard 1.8 V only Flash memories with the additional capability of allowing a normal non-delayed read access from a non-busy bank of the array while an embedded write (either a program or an erase) operation is simultaneously taking place on the other bank.
The Fujitsu MB15F74UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 4000 MHz and a 2000 MHz prescalers. It uses the BiCMOS process, with a typical supply current of 9.0 mA at 3.0 V. The supply voltage range is from 2.7 V to 3.6 V. It features high frequency operation, low power supply voltage, ultra low power supply current, selectable charge pump current, and direct power saving function.
This document describes the features and characteristics of Fujitsu Semiconductor's flash memory storage product, including the use of 0.23μm process technology, support for simultaneous read/write operations, single 3.0V power supply, compatibility with JEDEC standard commands, and worldwide pinout compatibility.
This document specifies the Spansion memory products offered by both Advanced Micro Devices and Fujitsu. The features and characteristics of these products remain unchanged, and they will be available to customers of both companies. Existing part numbers starting with 'Am' and 'MBM' are still supported for ordering.
Am29DL640G Data Sheet is a technology specification for a memory product released by AMD. This product has been retired and is not recommended for use.
This document is the user manual for TM 14ADV, a 14 ppm page printer. It provides instructions for using the printer and includes the Federal Communications Commission's radio frequency interference statement. The printer complies with the limits for a Class B digital device according to Part 15 of the FCC Rules, offering reasonable protection against harmful interference in residential installations. If the equipment causes harmful interference to radio or television reception, the user is advised to try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different circuit outlet than the receiver, or consulting a dealer or experienced radio/TV technician for assistance. FCC warning: Unauthorized changes or modifications may void the user's authority to operate the equipment.
This data sheet provides detailed information on Fujitsu Flash Miniature Card MB98C81013/81123/81233/81333, including dimensions, supply voltage, program and erase functions, detection of completion of program/erase operation, etc.
This document is the hardware manual for the MB87J2120 and MB87P2020-A Lavender & Jasmine Color LCD/CRT/TV Controller produced by FUJITSU SEMICONDUCTOR. The document provides specifications and functional descriptions of the products.
