Fujitsu manuals, page 5
FUJITSU SEMICONDUCTOR 8-bit Proprietary Microcontroller CMOS F2 MC-8L MB89640 Series MB89643/645/646/647/P647/PV640 handbook
MB89640 series is a general-purpose version of the F2MC*-8L series of single-chip microcontrollers. It is a single-chip microcontroller with a compact instruction set and a variety of peripheral functions.
FUJITSU SEMICONDUCTOR MB98A51121/51221/51321/51421/51521-17 DATA SHEET
MB98A51121/51221/51321/51421/51521-17 is a MASK ROM card released by Fujitsu Semiconductor. It has a 68-pin two-piece interface, supports PCMCIA Rel.2/JEIDA Ver.4, supports 8-bit × 16-bit configuration, external dimensions are 85.6 mm × 54.0 mm × 3.3 mm, working voltage is +5 V, static operation, output tri-state, no pull-up resistor or pull-down resistor.
FUJITSU Semiconductor MB90497/F497 handbook
The MB90495-series with FULL-CAN interface and FLASH ROM is especially designed for automotive and industrial applications
FUJITSU Semiconductor MB89490 Series handbook
The MB89490 series is a general-purpose version of the F2MC-8L family, which consists of proprietary 8-bit single-chip microcontrollers. In addition to a compact instruction set, the general-purpose single-chip microcontroller contains various peripheral functions such as a 21-bit timebase timer, watch prescaler, PWM timer, 8/16-bit timer/counter, remote receiver circuit, LCD controller/driver, external interrupt 0 (edge), external interrupt 1 (level), 10-bit A/D converter, UART/SIO, SIO, I2C, and watchdog timer reset. The MB89490 series is suitable for compact disc/radio receiver controllers as well as a wide range of applications for consumer products.
FUJITSU SEMICONDUCTOR DS05-20883-1E DATA SHEET
MBM29LV160TE/BE is a 16Mbit CMOS flash memory chip produced by Fujitsu Semiconductor. It supports 3.0V read, program and erase, is compatible with JEDEC standard commands, uses the same software commands as E2PROMs, is compatible with JEDEC standard world-wide pinouts, and comes in 48-pin TSOP, 48-pin CSOP, and 48-ball FBGA packages. It has 1,000,000 program/erase cycles and a maximum access time of 70ns. It supports sector erase, which allows any combination of sectors to be erased concurrently. It also supports full chip erase.
FUJITSU SEMICONDUCTOR DS05-20868-3E DATA SHEET
MBM29F002TC-55/-70/-90/MBM29F002BC-55/-70/-90 is a 2M (256K × 8) BIT CMOS flash memory chip released by Fujitsu Semiconductor. It supports JEDEC-standard commands, is compatible with single-power supply Flash, and has a minimum of 100,000 write/erase cycles and a maximum access time of 55ns
FUJITSU SEMICONDUCTOR DS05-30333-3E DATA SHEET
Fujitsu 5V-Only Flash memory cards are electrically erasable and programmable memory cards capable of storing and retrieving large amounts of data. They are housed in a credit-card sized 68-pin package and offer additional EEPROM memory that is used to store attribute data. The attribute memory is a Flash memory card option.
FUJITSU SEMICONDUCTOR DS07-13707-3E DATA SHEET
This data sheet introduces the features of the F2MC-16LX MB90520A/520B series 16-bit proprietary microcontrollers
FUJITSU SEMICONDUCTOR MB84VD2218XEG/EH/2219XEG/EH-90 handbook
This document introduces Fujitsu Semiconductor's Multi-Chip Package (MCP) flash memory and static RAM products. The flash memory has a power supply voltage of 2.7V to 3.3V, a maximum access time of 90ns, supports simultaneous read/write operations, and can perform up to 100,000 write/erase cycles. The static RAM has a maximum access time of 85ns and supports sector erase and full chip erase for different capacities.
FUJITSU SEMICONDUCTOR MB81P643287-50/-60 handbook
MB81P643287 is a Fujitsu CMOS Synchronous Dynamic Random Access Memory (SDRAM) with Fujitsu Advanced FCRAM (Fast Cycle Random Access Memory) Core Technology, containing 67,108,864 memory cells accessible in an 32-bit format. The MB81P643287 features a fully synchronous operation referenced to clock edge whereby all operations are synchronized at a clock input which enables high performance and simple user interface coexistence. The MB81P643287 is designed to reduce the complexity of using a standard dynamic RAM (DRAM) which requires many control signal timin.g constraints. The MB81P643287 uses Double Data Rate (DDR) where data bandwidth is twice of fast speed compared with regular SDRAMs. The MB81P643287 is ideally suited for Digital Visual Systems, High Performance Graphic Adapters, Hardware Accelerators, Buffers, and other applications where large memory density and high effective bandwidth are required and where a simple interface is needed. The MB81P643287 adopts new I/O interface circuitry, SSTL_2 interface, which is capable of extremely fast data transfer of quality under either terminated or point to point bus environment.
FUJITSU SEMICONDUCTOR MB4072 handbook
This document describes the features and characteristics of the Fujitsu MB4072 High-Speed Digital to Analog Converter IC. The MB4072 provides high impedance open-collector current outputs, which can be used for voltage output with a load or current to voltage converter in various applications with operational amplifiers, microcomputers, etc. The threshold level of digital inputs can be varied with the level control input to accommodate various interface levels. Additionally, the MB4072 features fast settling time, low linearity error, adjustable threshold level, and a wide supply voltage range.
FUJITSU SEMICONDUCTOR MB3874/MB3876 handbook
FUJITSU SEMICONDUCTOR MB89630R Series DATA SHEET
The MB89630R series is a general-purpose version of the F2MC*-8L family of proprietary 8-bit single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions such as dual-clock control system, five operating speed control stages, a UART, timers, a PWM timer, a serial interface, an A/D converter, an external interrupt, and a watch prescaler.
FUJITSU SEMICONDUCTOR MB89160/160A Series handbook
The MB89160 series is a line of general-purpose, single-chip microcontrollers. It features a compact instruction set and various peripheral functions such as an LCD controller/driver, A/D converter, timers, serial interface, PWM timers, and external interrupts.
FUJITSU SEMICONDUCTOR F5CE Series (D2 type) handbook
The F5CE-D2 series is a surface acoustic wave (SAW) bandpass filter that operates in the frequency range of 700 to 1000 MHz. These filters utilize unique DMS (Double Mode SAW) technology to achieve high stopband attenuation and excellent passband flatness. Additionally, they are offered in a compact 3.0 mm² package, contributing to reduced weight and size in mobile communication units. The F5CE-D2 series of SAW filters are suitable for interstage RF filtering in mobile communication systems operating in the frequency range of 700 to 1000 MHz. Standard devices are available for AMPS/CDMA/TDMA, GSM, PDC800, and ISM900.