DYRAN Manuals

The 3263AT triaxial accelerometer features IEPE output and TEDS functionality with a 40 kHz natural frequency and 500g maximum full scale.

This document describes the features and performance specifications of model 3023A5 accelerometer, including miniature size, temperature stability, and weight.

This is the specification table of Dytran 3023A6 triaxial accelerometer. It has 4 gram weight, 0.49 x 0.36 x 0.36 inches size, 10-32 tapped hole, 4 pin connector. The accelerometer has +/- 1000g full scale range, 5 mV/g sensitivity, 1.5 to 5000Hz frequency response, 0.0095g equivalent electrical noise, 1%FS linearity and 5% transverse sensitivity.

The 3023A6H accelerometer is a high temperature, high precision, high reliability accelerometer sensor. The range of the accelerometer is ±1000g, the resolution is 5mV/g, and the frequency response is 1.5 to 10000Hz. It uses a titanium alloy housing and has waterproof, dustproof and shockproof properties.

Specs of the 3023A9 triaxial accelerometer, including physical properties, performance, environment, power supply

Technical specifications of the 3023M23 triaxial accelerometer, including size, weight, mounting method, connector, material, performance, frequency response, noise, linearity, signal polarity, environment, power range, output impedance, output bias voltage, discharge time constant and ground isolation.

This is a performance specification for a triaxial accelerometer, model number 3023M27. The maximum measurement range is 500g, the sensitivity is 10mV/g, and the frequency response range is 1.2 to 5000Hz.

This document is the performance specification of PS3023M30 triaxial accelerometer, which has high temperature, hermetically sealed and miniature size, with a maximum measurement range of ±500 g and a frequency response range of 1.2-5000 Hz. The linearity is 1%F.S.

This product is an accelerometer with high sensitivity, wide frequency response, and fast response speed, which is suitable for a variety of measurement occasions.

3225A1, 3225A2, 3225A3, 3225A4 belong to the same product family, with ideal low frequency response, titanium alloy housing and ceramic sensing element. The series products have a sensitivity of 200 mV/g, a measurement range of 1 Grms, a frequency response of 1 to 10000 Hz, a linearity of 5% F.S., a broadband resolution of 0.0002 Grms and a resonant frequency of 35 kHz.

The 3256A series of linear accelerometers are sensors used to detect vibration and shock. It has 10, 100, 500, 20, 50 and 200 mV/g sensitivity, can measure 1 to 10,000 Hz frequency. The accelerometer has a 32 kHz resonant frequency, 0.007, 0.0007, 0.00014, 0.0035, 0.0014 and 0.003 g rms electrical noise, and a linearity of ±2 %F.S. with a maximum transverse sensitivity of 5%.

This document provides specifications and characteristics of the model series 3055B LIVM accelerometers. These accelerometers weigh 10 grams and have a size of 0.50 x 0.62 inches. They are mounted using a 10-32 tapped hole. The connector is a radially mounted 10-32 coaxial connector made of titanium. The sensitivity and measurement range vary depending on the model, with a frequency range of 1 to 10,000 Hz and a resonant frequency of 35 kHz. The temperature range is -60 to +250°F, with a hermetic seal of glass-to-metal/welded. The output signal polarity is positive for acceleration towards the top. The electrical isolation is 10 min megaohms. The document provides specific numerical values for the specifications.

This document is the technical manual of the 3225A1 accelerometer. It introduces the characteristics, specifications, performance, etc. of the sensor.