Atmel manuals, page 18
ATMEL -8-bit Microcontroller with 64K/128K/256K Bytes In-System Programmable Flash ATmega640/V ATmega1280/V ATmega1281/V ATmega2560/V ATmega2561/V handbook
The ATmega1280 is a high-performance, low-power microcontroller in the AVR® 8-bit microcontroller family that features 135 powerful instructions, most single-clock cycle execution, 32 x 8 general-purpose working registers, full static operation, up to 16 MIPS throughput at 16 MHz, an on-chip 2-cycle multiplier, 64K/128K/256K bytes of in-system self-programmable Flash, 4K bytes EEPROM, 8K bytes internal SRAM, 10,000 Flash/100,000 EEPROM write/erase cycles, 20 years of data retention at 85°C/100 years of data retention at 25°C, an optional boot code section with independent lock bits, in-system programming by on-chip boot program, true read-while-write operation, software security programming lock, up to 64K bytes optional external memory space, JTAG (IEEE std. 1149.1 compliant) interface, boundary-scan capabilities according to the JTAG standard, extensive on-chip debug support, programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG interface
ATMEL -8-bit Microcontroller with 32K/64K/128K Bytes of ISP Flash CAN Controller AT90CAN32 AT90CAN64 AT90CAN128 handbook
AT90CAN series is a 32-bit high performance low-power AVR® micro-controller with CAN controller and powerful RISC architecture, 133 single-cycle execution instructions, 32 general purpose registers, 32K/64K/128K bytes of rewritable flash, 1K/2K/4K bytes of EEPROM, 2K/4K/4K bytes of internal SRAM, 1Mbits/s maximum transmission rate at 8 MHz clock frequency, programmable watchdog timer and other features.
ATMEL ATmega64 ATmega64L Manual
This document describes a high-performance, low-power AVR® 8-bit microcontroller with advanced RISC architecture, non-volatile program and data memories, peripheral features, JTAG interface, and other characteristics.
ATMEL -8-bit Microcontroller with In-System Programmable Flash ATmega325/V ATmega3250/V ATmega645/V ATmega6450/V Preliminary handbook
Introduces features and characteristics of AVR® 8-bit microcontrollers ATmega325/ATmega3250 and ATmega645/ATmega6450.
ATMEL -8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash ATtiny261/V ATtiny461/V ATtiny861/V handbook
ATtiny261/461/861 is a high performance, low power AVR® 8-Bit Microcontroller from Atmel.
ATMEL ATmega16/ATmega16L Manual
This datasheet provides detailed information on the Atmel 2466J-AVR-8-bit microcontroller, including features, memory, peripherals, pins, dimensions, and packages.
ATMEL Atmel AVR Microcontroller Family Selection Guide
This document provides a cross-reference table of Farnell and Equinox order codes, as well as a product selection guide for the Atmel AVR microcontroller family. The document lists the features and characteristics of different models of microcontrollers, including storage capacity, programmability, and hardware features.
ATMEL ATmega8515/ATmega8515L Manual(1)
This document describes the features of the ATmega8515L/ATmega8515 microcontrollers, including RISC architecture, nonvolatile program and data memories, peripheral features, special microcontroller features, I/O and packages.
ATMEL ATtiny24/44/84 Preliminary Manual
ATtiny24/44/84 is a high-performance, low-power AVR® 8-bit microcontroller with an advanced RISC architecture that can execute 120 powerful instructions, most of which are executed in a single clock cycle. It has 32 x 8 general-purpose working registers and fully static operation. ATtiny24/44/84 has 2/4/8K bytes of In-System Programmable Program Memory Flash (ATtiny24/44/84), endurance of 10,000 write/erase cycles; 128/256/512 bytes of In-System Programmable EEPROM (ATtiny24/44/84), endurance of 100,000 write/erase cycles; 128/256/512 bytes of internal SRAM (ATtiny24/44/84); and programmable locking for self-programming Flash program and EEPROM data security.
ATMEL ATmega128/ATmega128L Manual
This document introduces the features of the ATmega32A series of 8-bit MCUs, including high performance, low power consumption, a large number of channels, extensive functions, and flexible expandability.
ATMEL ATmega8515/ATmega8515L Manual
This document describes a high-performance, low-power AVR 8-bit microcontroller with features such as RISC architecture, nonvolatile program and data memories, peripheral features, special microcontroller features, and I/O and packages.
ATMEL ATmega48/V ATmega88/V ATmega168/V Manual
This is a PDF file about ATmega8A microcontroller. ATmega8A is a high performance, low power AVR® 8-bit microcontroller. It has advanced RISC architecture, 131 powerful instructions, most single clock cycle execution, 32 x 8 general purpose working registers, fully static operation, up to 20 MIPS throughput at 20 MHz, on-chip 2-cycle multiplier.
ATMEL - 8-bit Microcontroller with 32K Bytes In-System Programmable Flash ATmega32 ATmega32L handbook
This document introduces the features and characteristics of the ATmega162 microcontroller, including high performance, low power, high endurance non-volatile memory segments, JTAG (IEEE std. 1149.1 Compliant) interface, boundary scan capabilities, extensive on-chip debug support, two 8-bit timers/counters, one 16-bit timer/counter, real time counter, four PWM channels, 8-channel, 10-bit ADC 8 single-ended channels 7 differential channels in TQFP package only 2 differential channels with programmable gain(1x, 10x or 200x), byte-oriented two-wire serial interface, programmable serial USART, master/slave SPI serial interface, programmable watchdog timer
ATMEL JTAGICE mkII Quick Start Guide
JTAGICE mkII is Atmel's on-chip debugging tool for the AVR® microcontroller family. It supports debugging with AVR's traditional JTAG interface and with the debugWIRE interface. The JTAGICE mkII supports PC communication via RS-232 and USB. It is supported by AVR Studio version 4.09 and later. When connecting to the target board through the debugWIRE interface, only the RESET pin is used for communication. To enable the debugWIRE interface on an AVR Device, the debugWIRE Enable fuse, DWEN, must be programmed (DWEN=0). AVR devices with debugWIRE interface are shipped with the DWEN fuse unprogrammed. ISP or High-Voltage Programming is required to enable debugWIRE. Programming the fuse via ISP requires an ISP header on the target board. Using the 6-pin ISP header as shown in Figure 1 is recommended. The JTAGICE mkII supports ISP as a general programming interface, as well as having built-in support for handling the DWEN fuse and performing the Chip Erase when debugging. ISP is also supported by Atmel's STK500 and AVRISP mkII. See the relevant user guides for more information. All user guides are found in the AVR Studio Online help. The recommended connection when the JTAGICE mkII is used for both debugWIRE and limited ISP is the ISP6PIN header. See Figure 1, Figure 2 on page 2, and Table 1 on page 2.
atmel Designer s Corner Designing for Efficient Production with In-System Re-programmable Flash Cs
This document discusses the advantages of Atmel's megaAVR family of microcontrollers in terms of reducing time-to-market and improving production efficiency. It describes the development tools, on-chip resources, efficiency for high level languages, and fast and reliable programming capabilities of this microcontroller family.