VISHAY Manuals

2322 615 4.. Vishay BCcomponents NTC Thermistors is a surface mount NTC thermistor produced by Vishay. Its features are high sensitivity, high accuracy, suitable for wave soldering and reflow soldering, and suitable for applications such as battery chargers, consumer equipment, and office equipment.

The TSOP28..PM1 is a miniaturized receiver for infrared remote control systems with an internal filter that provides reliable functionality.

The DG411HS/412HS/413HS series is a precision quad SPST CMOS analog switch, providing high speed, low error switching of precision analog signals. It is ideal for portable and battery powered industrial and military applications.

The CWR11 series is Vishay Sprague's TANTAMOUNT® military solid tantalum chip capacitors that are rated for operation from -55°C to +85°C and have a voltage rating of 4 WVDC to 50 WVDC. These capacitors have a capacitance range of 0.10µF to 100µF and are available with ±20%, ±10% and ±5% tolerances. The CWR11 series capacitors are available in four different case codes and offer multiple termination and surge current options.

BPV10NF is a high sensitive and wide bandwidth PIN photodiode in a standard T-1¾ plastic package. The black epoxy is a universal IR filter, spectrally matched to GaAs (λ = 950 nm) and GaAlAs (λ = 870 nm) IR emitters. BPV10NF is optimized for serial infrared links according to the IrDA standard. Features include extra fast response times, high modulation bandwidth (>100 MHz), high radiant sensitivity, radiant sensitive area A = 0.78 mm2, low junction capacitance, standard T-1¾ (∅ 5 mm) package with universal IR filter, angle of half sensitivity ϕ = ± 20°.

TSAL6100 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology from Vishay Semiconductors. It features extra high radiant power and radiant intensity, high reliability, low forward voltage, suitable for high pulse current operation, and good spectral matching to Si photodetectors. It is suitable for applications such as infrared remote control units with high power requirements, free air transmission systems, infrared source for optical counters and card readers, IR source for smoke detectors.

This document describes the TLC series of ultrabright LEDs from Vishay Semiconductors, including red, yellow, true green, and blue LEDs. These LEDs feature high luminous intensity, high operating temperature, and optimized viewing angles, making them suitable for high-end applications.

Vishay Semiconductors VLMP31.. SMD LED in PLCC-2 Package is a high brightness SMD LED produced by Vishay company. It meets the RoHS standard and is compatible with automatic placement equipment. It can be used in automotive, telecommunications, audio and video equipment, office equipment and other fields.

CNY17F is an optocoupler consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector in a plastic plug-in DIP-6 package. It has features such as isolation test voltage, no base terminal connection for improved common mode interface immunity, and long term stability.

This document introduces the features and characteristics of Vishay Semiconductors VLM.33.. series. The series products use (AS) AlInGaP technology and can be used on 8mm tapes. The package units are categorized by luminous intensity and color. The luminous intensity ratio of each package unit is less than 1.6. The thermal resistance is R = 400 K/W. The ESD-withstand voltage is up to 2 kV, and meets the JEDEC Level 2a preconditioning requirements. It is compatible with Reflow, vapor phase and wave solder processes, meets CECC 00802 and J-STD-020C requirements, meets RoHS 2002/95/EC and WEEE 2002/96/EC requirements, and meets AEC-Q101 19225 e3 standard.

This document is the datasheet of Vishay Semiconductors VLMF31.., which provides a detailed introduction of the product's features and characteristics.

The document introduces the features and characteristics of Vishay Semiconductors VLMC310 Low Current SMD LED PLCC-2, including exceptional brightness, compatibility with automatic placement equipment, EIA and ICE standard package, compatibility with infrared, vapor phase and wave solder processes according to CECC 00802 and J-STD-020C, available in 8 mm tape, low profile package, non-diffused lens suitable for coupling to light pipes and backlighting, very low power consumption, luminous intensity ratio in one packaging unit IVmax/IVmin ≤ 2.0, lead-free device, and compliance with RoHS 2002/95/EC and WEEE 2002/96/EC.

The TELUX™ series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed with super bright, AllnGaP, OMA technology. The supreme heat dissipation of TELUX™ allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage and color to achieve the most homogenous light appearance in application. SAE and ECE color requirements for automobile application are available for color red. ESD resistivity 2 kV (HBM) according to MIL STD 883D, method 3015.7.