ST Manuals

M95640-A125 M95640-A145 is ST's automotive 64Kbit serial SPI bus EEPROM, compatible with SPI bus, with 64Kbits(8Kbytes) of EEPROM, 32 bytes page size, 1/4, 1/2 or entire memory write protection, additional write lockable page(identification page), high temperature and voltage range, high clock frequency, Schmitt trigger input, short write cycle time, write cycle endurance, data retention time, ESD protection and RoHS-compliant and halogen-free(ECOPACK2®) packaging

The M95160-125 is an automotive 16Kbit serial SPI bus EEPROM that is compatible with the Serial Peripheral Interface (SPI) bus. It has a 16Kbit (2Kbyte) EEPROM memory array, a page size of 32 bytes, a read time of 5 ms, and a page write time of 5 ms. It supports quarter, half, or whole memory array write protection. It also supports a high-speed clock of 5 MHz, a single supply voltage of 4.5V to 5.5V, an operating temperature range of -40°C to +125°C, enhanced ESD protection, more than 1 million write cycles, and more than 40 years of data retention. It is RoHS compliant and halogen-free (ECOPACK®) and comes in SO8 (MN) 150 mil width and TSSOP8 (DW) 169 mil width packages.

This document provides information on a product that is in full production. The product is an automotive MICROWIRE serial EEPROM memory with capacities of 1 Kb, 2Kb, 4Kb, 8 Kb, or 16 Kb. It uses the industry standard MICROWIRE bus and has dual organization by word (x16) or byte (x8). It features the ability to write a byte or word within 5 ms, supports a 2 MHz clock rate, provides a READY/BUSY signal during programming, operates with a single supply voltage of 4.5 V to 5.5 V or 2.5 V to 5.5 V, has an operating temperature range of -40°C to 125°C, offers enhanced ESD protection, supports over 1 million write cycles, and has over 40-year data retention. The product is available in various packages including SO8, TSSOP8, and PDIP8.

The M95080-125 is a 8 Kbit serial SPI bus EEPROM from ST. It has 8 Kb (1 Kbyte) of EEPROM memory, with a page size of 32 bytes. It can be written within 5 ms for byte write and 5 ms for page write. The memory array can be protected by quarter, half or whole. The chip has a high-speed clock of 5 MHz, single supply voltage of 4.5 V to 5.5 V, operating temperature range of -40°C to +125°C, enhanced ESD protection, and more than 1 million write cycles.

This document provides information about a product in full production. The product is M24C16-125 M24C08-125 M24C04-125 M24C02-125, an automotive 16-Kbit, 8-Kbit, 4-Kbit, and 2-Kbit serial I²C bus EEPROM. The product features include compatibility with I²C bus modes, different capacities of EEPROM memory, fast and standard modes, single supply voltage, wide operating temperature range, random and sequential read modes, automatic address incrementing, write protect of the whole memory array, enhanced ESD/Latch-Up protection, more than 1 million write cycles, and more than 40-year data retention.

This document describes the features of M95040-125, M95020-125, and M95010-125, which are automotive SPI bus EEPROMs. These EEPROMs have different storage capacities and write protection options, and are suitable for automotive applications with an operating temperature range of -40°C to +125°C. They support SPI bus communication with a clock frequency of 5MHz, a write cycle time within 5ms, more than 1 million write cycles, and over 40 years of data retention. Additionally, they have enhanced ESD protection and RoHS-compliant and halogen-free packages.

M24LR64-R is a 64 Kbit EEPROM produced by ST with password protection and dual interfaces: 400 kHz I²C serial bus and ISO 15693 RF protocol, working at 13.56 MHz.

The LRIS64K 64 Kbit EEPROM tag IC at 13.56 MHz with 64-bit UID and password based on ISO/IEC 15693 and ISO/IEC 18000-3 Mode 1 Standards.

SRI2K is a 13.56MHz short-range contactless memory chip with 2048-bit EEPROM and anticollision functions.

This datasheet describes the STMicroelectronics M24512 series of 512 Kbit (64 Kbytes) EEPROM devices. The devices are available in four versions: M24512-W, M24512-R, M24512-DR and M24512-DF. The M24512 series EEPROM devices are compatible with all I2C bus modes, operate with a supply voltage of 1.7V to 5.5V and have a temperature range of -40°C to +85°C. The M24512 series EEPROM devices offer random read and sequential read modes, write protection and enhanced ESD/Latch-Up protection.

The M95640, M95640-W, M95640-R and M95640-DR are 64 Kbit serial SPI bus EEPROMs with high-speed clock, which are produced by ST. The features of the product are: the memory array is 64 Kb (8 Kbytes) EEPROM, the page size is 32 bytes, it has Write lockable Page (Identification page), supports Byte Write within 5 ms and Page Write within 5 ms, supports Write Protect, the highest clock frequency is 20 MHz, the single supply voltage is 1.8 V to 5.5 V, supports 1 million Write cycles and 40-year data retention, and has Enhanced ESD Protection.

This document provides information on a product that is in full production. The product is a 128-Kbit serial I²C bus EEPROM with various features and characteristics.

The LRI1K 1024-bit EEPROM tag IC is a RFID tag IC compliant with ISO 15693 and ISO 18000-3 Mode 1 standards. This IC works at 13.56 MHz and supports 10% or 100% ASK modulation with 1/4 (26 Kbit/s) or 1/256 (1.6 Kbit/s) pulse position coding.