STMicroelectronics manuals, page 209
ST STEVAL-ISA096V1 handbook
The STEVAL-ISA096V1 is a switched mode power supply (SMPS) demonstration board. This non-isolated SMPS is designed in a buck-boost topology and is capable of delivering up to 2 W of output over a wide input voltage range. This board also offers the user the possibility of adapting the circuit to specific needs, thanks to an available free PCB area.
ST STEVAL-IPE015V1 handbook
This document is a data brief for the STEVAL-IPE015V1 single-phase energy metering demonstration board by STMicroelectronics. The demonstration board features class 0.5 accuracy, Vnom(RMS) of 140 to 300V, Inom/Imax(RMS) of 2/20A, and flin of 45 to 65Hz. It also includes tamper detection for power line systems, capacitive power supply, SPI interface connector, and is RoHS compliant.
ST STEVAL-IPE016V1 handbook
ST STEVAL-IPE017V1 handbook
The STEVAL-IPE017V1 is a single-phase class 0.5 accuracy demonstration board based on the STPM10 chip and a shunt resistor for energy metering. It is designed for power line systems with a nominal voltage of 140 to 300 VRMS, a nominal/current maximum current of 2/20 ARMS, a frequency range of 45 to 65 Hz, and an operating temperature range of -40 to +85 °C. This demonstration board features a capacitive power supply, SPI interface connector, and is RoHS compliant.
ST STEVAL-IPE018V1 handbook
The STEVAL-IPE018V1 is a single-phase energy metering demonstration board released by ST company, based on the STPM10 chip, with a class 0.5 accuracy, an rated voltage of 140 to 300 V, an rated current of 2 to 20 A, a frequency of 45 to 65 Hz, capacitive power supply, and RoHS compliance.
ST STEVAL-IFP010V3 handbook
ST STEVAL-IFP020V1 handbook
Introduces the STEVAL-IFP020V1 PLC (for industrial automation) digital output solution using a 2.5 A single high-side smart power switch based on the L6370Q
ST EVLALTAIR900-M1 handbook
This document describes a double output SMPS module for power line applications, using the ALTAIR04-900 primary controller. The module features universal input mains range, double output voltage, optoless constant voltage-constant current output regulation, etc.
ST STEVAL-IFP021V1 handbook
The STEVAL-IFP021V1 demonstration board is based on the STEF05 and STEF12 electronic fuses (E-Fuses). It features input voltages of 5V and 12V, continuous current of 3.6A each, adjustable slew rate for output voltage, overvoltage clamp, undervoltage lockout, programmable short-circuit current limit, overload current limit, controlled output voltage ramp, thermal latch protection, fault condition flag, and enable pin.
ST STEVAL-ISV002V2 handbook
This document describes a 3000W photovoltaic converter for grid-connected applications. The converter has a wide input and output voltage range, high efficiency, and significant reduction in production costs.
ST STEVAL-IHM035V1 handbook
The STEVAL-IHM035V1 is a power board designed to drive a high voltage/low power 3-phase brushless motor. It utilizes the ST IPM STGIPN3H60 (SLLIMM™-nano) for compact size and efficient power dissipation. The board is compatible with synchronous or asynchronous brushless motors (PMSM and ACIM) and can be interfaced with any ST MCU control board to implement a complete motor drive.
ST STEVAL-TLL006V2 handbook
STEVAL-TLL006V2 is a new high-power LED driver demo board for single flash with I²C interface based on STCF06 (with motherboard based on µPSD).
ST EVL150W-ADP-SR handbook
This data sheet introduces the EVL150W-ADP-SR 12V-150W resonant converter features, such as universal input mains range, output voltage, mains harmonics, standby mains consumption, efficiency, EMI, safety, dimensions, PCB, etc
ST STEVAL-ILD003V2 handbook
The document introduces STEVAL-ILD003V2, an analog wall dimmer based on TS820 for CFL/LED lamps, with a dimming range of 20-350W, meeting RoHS standard
ST STEVAL-IPR002V1 handbook
This document is the datasheet of STEVAL-IPR002V1. It introduces the features of the product, including dual communication interfaces (RF and I2C) of M24LR64 EEPROM, temperature, motion (MEMS), humidity and light (photo diode) parameters recording, two operation modes (RFID mode and I2C mode), 20mm x 40mm inductive antenna, and Android NFC application DatalogV3