Analog Devices Manuals

The ADP1611 is a step-up dc-to-dc switching converter with an integrated 1.2 A, 0.23 Ω power switch capable of providing an output voltage as high as 20 V. With a package height of less than 1.1 mm, the ADP1611 is optimal for space-constrained applications such as portable devices or thin film transistor (TFT) liquid crystal displays (LCDs). It features adjustable output voltage, 3% output regulation accuracy, and adjustable soft start.

This document introduces the features and characteristics of ADT7475 dBCool controller. ADT7475 dBCool controller is a thermal monitor and multiple PWM fan controller for noise-sensitive systems. It can control and monitor up to 4 fans and has high and low frequency fan drive signals.

The AD5258 is a nonvolatile, 64-position, digital potentiometer with an I2C® compatible interface. It features EEPROM storage to retain wiper settings after power-down and a VLOGIC pin to provide increased interface flexibility. The AD5258 is rated for operation over the -40°C to +85°C temperature range and with a supply voltage of 3 V to 5 V.

The ADG438F/ADG439F is a high performance 4/8 channel fault-protected analog multiplexer. This multiplexer has fast switching times (tON 250 ns max, tOFF 150 ns max), fault protection and overvoltage protection (-40 V, +55 V), all switches off with power supply off, analog output of ON channel clamped within power supplies if an overvoltage occurs, high reliability structure, TTL and CMOS compatible inputs, etc., which can be applied to data acquisition systems, industrial and process control systems, avionics test equipment, signal routing between systems and high reliability control systems.

AD8591/AD8592/AD8594 is a CMOS single supply operational amplifier produced by Analog Devices, USA. It has the characteristics of single supply operation, high output current, extremely low shutdown supply current, low power consumption, wide bandwidth, high transient response speed, no phase reversal, extremely low input bias current and high impedance output.

AD724 is a low cost RGB to NTSC/PAL Encoder that converts red, green and blue color component signals into their corresponding luminance (baseband amplitude) and chromi- nance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards.

This document describes the features and characteristics of the 12-Bit High Speed Multiplying D/A Converter DAC312 produced by Analog Devices, including differential nonlinearity, nonlinearity, fast settling time, high compliance, differential outputs, guaranteed monotonicity, and low full-scale temperature coefficient.

AD6655 Rev. 0 is a diversity receiver with high SNR and high dynamic range. It supports multiple sampling rates and input ranges, suitable for applications such as communications.

dBCool® Remote Thermal Monitor and Fan Controller ADT7473 controls and monitors up to 4 fans with high and low frequency fan drive signal. It has 1 on-chip and 2 remote temperature sensors with series resistance cancellation on the remote channel. It provides extended temperature measurement range up to 191°C, dynamic TMIN control mode to optimize system acoustics intelligently, automatic fan speed control mode to control system cooling based on measured temperature, enhanced acoustic mode to dramatically reduce user perception of changing fan speeds, thermal protection feature via THERM output, monitoring performance impact of Intel® Pentium®4 processor, thermal control circuit via THERM input, 3-wire and 4-wire fan speed measurement, limit comparison of all monitored values, and meets SMBus 2.0 electrical specifications (fully SMBus 1.1 compliant). It is fully ROHS compliant.

This document introduces the features and characteristics of DAC16 products, such as low distortion, high signal-to-noise ratio, and high speed, and is suitable for applications in communications, instrumentation, and ATE systems.

The ADSP-BF537 EZ-KIT Lite® provides developers with a cost-effective method for evaluation of the ADSP-BF537 Blackfin® Processor and its rich set of system peripherals, including the IEEE 802.3 10/100 Ethernet MAC and CAN® 2.0B controller.

ADSP-2181 is a single-chip microcomputer launched by Cypress Company. It has high performance, low power consumption and multifunctional features. It adopts a 3-bus architecture, supports dual-operand fetching in every instruction cycle, and single-cycle instruction execution. ADSP-2181 also has independent ALU, multiplier/accumulator and barrel shifter computational units, as well as two independent data address generators and powerful program sequencer. In addition, ADSP-2181 also integrates a 16-bit internal DMA port for high-speed access to on-chip memory.

AD8628/AD8629/AD8630 are zero-drift, single-supply, rail-to-rail input/output operational amplifiers with a 5-V supply voltage range.