Analog Devices Manuals

The ADA4841-1/ADA4841-2 is a low-power, low-noise, low-distortion, rail-to-rail output amplifier. It features low power consumption (1.1 mA/amp), low wideband noise (2.1 nV/√Hz, 1.4 pA/√Hz), low 1/f noise (7 nV/√Hz @ 10 Hz, 13 pA/√Hz @ 10 Hz), low distortion (-105 dBc @ 100 kHz, VO = 2 V p-p), high speed (80 MHz, -3 dB bandwidth (G = +1), 12 V/μs slew rate, 175 ns settling time to 0.1%), low offset voltage (0.3 mV max), rail-to-rail output, power down, and wide supply range (2.7 V to 12 V).

The ADA4410-6 is a comprehensive integrated filtering solution that is carefully designed for applications with resolutions up to 1080i and supports multiple video standards. It features selectable cutoff frequencies and gain, making it ideal for various applications such as set-top boxes, DVD players and recorders, and HDTV.

This document introduces a low-cost, precision JFET input operational amplifier with features such as low offset voltage, small packaging, high slew rate, low voltage noise, etc. It can be used in applications such as reference gain/buffers, level shift/driving, active filters, power line monitoring/control, current/voltage sense or monitoring, data acquisition, sample-and-hold circuits, integrators, etc.

The ADM181x range of voltage monitors is a low cost, reliable voltage monitor that supports monitoring of supplies within 5%, 10%, 15% and 20% tolerance. The series offers push-pull and open drain outputs, and can be used with a manual push-button to generate a reset.

This file is preliminary technical data, which introduces the following content: 1. Product introduction; 2. System composition; 3. System function; 4. Technical scheme; 5. Key technology; 6. System performance; 7. System application.

The ADM1487 is a low power RS-485/RS-422 transceiver with three-state outputs. The device features slew-rate limited drivers to minimize electro-magnetic interference (EMI) and reduce reflections caused by incorrectly terminated cables.

This datasheet provides detailed information on the features and characteristics of the ADM1486 low power RS-485 PROFIBUS transceiver. The ADM1486 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission, complies with EIA Standards RS-485 and RS-422, and is recommended for PROFIBUS applications.

ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422.

ADM3202/ADM3222/ADM1385 are high-speed, 2-channel RS-232/V.28 interface devices that operate from a single +3.3 V power supply. They have low power consumption and a shutdown facility, making them ideal for battery-powered portable instruments. ADM3202/ADM3222/ADM1385 conform to the EIA-232E and CCITT V.28 specifications and operate at data rates up to 460 kbps.

ADM1232A is a microprocessor monitoring circuit that can be used in microprocessor systems, portable equipment, computers, controllers, intelligent instruments, and automotive systems. It features low power consumption, adjustable precision voltage monitoring, and STROBE monitoring.

The ADM1232 is a superior, pin-compatible upgrade for the MAX1232 and the DS1232LP and DS1232. It is a microprocessor monitoring circuit that can monitor the microprocessor supply voltage, whether the microprocessor has locked-up, and an external interrupt. It features adjustable precision voltage monitor, adjustable STROBE monitor, low power consumption, and is suitable for various applications including microprocessor systems, portable equipment, computers, controllers, intelligent instruments, and automotive systems.

The document describes the features and characteristics of the ADM202E and ADM1181A, which are robust, high-speed, 2-channel RS232/V.28 interface devices.

This document describes the features and characteristics of the ADM1178 Hot Swap Controller and Digital Power Monitor, including safe board insertion and removal, control of supply voltages from 3.15V to 16.5V, precision current and voltage readback, overcurrent interrupt, etc.

The ADM1177 is a hot swap controller and digital power monitor with soft start pin from Analog Devices. It allows safe board insertion and removal from a live backplane, and controls supply voltages from 3.15 V to 16.5 V. The device also has precision current sense amplifier, precision voltage input, 12-bit ADC for current and voltage readback, charge pumped gate drive, adjustable analog current limit with circuit breaker, ±3% accurate hot swap current limit level, fast response limits peak fault current, automatic retry or latch-off on current fault, programmable hot swap timing via TIMER pin, soft start pin for reference adjustment and programming of initial current ramp rate, active-high ON pin, I2C® fast mode-compliant interface (400 kHz maximum) and 10-lead MSOP.

The ADM1176 is a hot swap controller and I2C® power monitor with convert pin. This device enables safe board insertion and removal from a live backplane, and supports 12-bit ADC for current and voltage readback.