Analog Devices Manuals

This document introduces the characteristics of ADM1175. ADM1175 is a hot swap controller and digital power monitor with convert pin. It allows safe board insertion and removal from a live backplane, controls supply voltages from 3.15 V to 16.5 V, precision current sense amplifier, precision voltage input, 12-bit ADC for current and voltage readback, charge pumped gate drive for external N-channel FET, adjustable analog current limit with circuit breaker, ±3% accurate hot swap current limit level, fast response limits peak fault current, automatic retry or latch-off on current fault, programmable hot swap timing via TIMER pin, active-high and active-low ON/ONB pin options, convert start pin (CONV), I2C® fast mode-compliant interface (maximum 400 kHz), 10-lead MSOP

The ADM1200 is an NFET driver with a programmable slew rate control system that ensures that the output voltage rises and falls at a controlled rate and in a linear fashion.

ADM1085/ADM1086/ADM1087/ADM1088 is a simple sequencer that provides programmable time delays between enable signals. It can be cascaded with power modules for multiple supply sequencing and also monitors power supply from 0.6V. The output stages are high voltage (up to 22V) open-drain output (ADM1085/ADM1087) and push-pull output (ADM1086/ADM1088) with capacitor-adjustable time delays. It has high voltage (up to 22V) enable and VIN inputs with low power consumption (15µA). It is specified over –40°C to +125°C temperature range and packaged in a 6-lead SC70 package.

This document introduces the features and characteristics of the ADM1073 hot swap controller

This document introduces the features and functions of the ADM1073 product

The ADM1072 is a logic controlled, dual P-channel switch with low on resistance and a built-in current limiter, capable of sourcing up to 1A from supply voltages between 2.7V and 5.5V. In addition to logic inputs that switch each channel on and off, the device has a standby input that switches the output current limit, making it ideal for use with USB peripherals. In normal operating mode and Standby mode the output current limit is 100mA.

The ADM1070 is a 48V hot swap controller from Analog Devices that provides safe board insertion and removal, prevents overcurrent and short circuit, and provides overvoltage and undervoltage detection.

The ADM1069 is a Super Sequencer™ with Margining Control. It provides complete supervisory and sequencing solution for up to 8 supplies. It has a variety of features that make it very useful in power monitoring and regulation applications.

Super Sequencer™ and Monitor ADM1068 Rev. 0 is a complete supervisory and sequencing solution for up to 8 supplies. It features 8 supply fault detectors that enable supervision of supplies to better than 1% accuracy. It also has 4 selectable input attenuators that allow supervision of supplies. It further includes 4 dual-function inputs, 8 programmable output drivers, and a sequencing engine for state machine control of outputs.

The ADM1170 is a hot swap controller that allows safe insertion and removal of a board from a live backplane. It controls supply voltages from 0.6V to 16.5V and has a supply voltage range from 2.7V to 16.5V. It features true soft start controls for inrush current profile, adjustable analog current limit with circuit breaker, fast response limits peak fault current, automatic retry or latch-off on current fault, charge pumped gate drive for external N-FET switch, and undervoltage lockout. The ADM1170 is suitable for hot swap board insertion, electronic circuit breaker, and industrial high side switch/circuit breaker.

ADM1065 is the Analog Devices Super Sequencer and Monitor. It can monitor and control up to 10 supplies and provides a wide range of output drivers and power fault detection features.

The ADM1064 is a power monitor and sequencer that monitors up to 10 supplies and provides 10 output drivers and an internal sequencing engine.

The document describes the ADM1063 Rev. 0 Multisupply Supervisor/Sequencer with ADC and Temperature Monitoring. It provides a complete supervisory and sequencing solution for up to 10 supplies. The device features 10 supply fault detectors with better than 1% accuracy, 5 selectable input attenuators for supplies up to 14.4V, 5 dual-function inputs, and 10 programmable output drivers. It also includes a sequencing engine for state machine control of the output drivers.

ADM1062 is a Super Sequencer™ with Margining Control and Temperature Monitoring. It is a complete supervisory and sequencing solution for up to 10 supplies. 10 supply fault detectors enable supervision of supplies to better than 1% accuracy

The document is about the preliminary technical data of ADM1060 Communications System Supervisory/Sequencing Circuit. It describes the features and characteristics of the product.