Analog Devices manuals, page 98
ANALOG DEVICES ADD8706: 16 V 5 1-Channel Operational Amplifier Data Sheet (Rev 0 2003-10-01-)
The ADD8706 is a single-supply, 5-channel buffer with a separate VCOM amplifier that has been optimized for today’s low cost TFT LCD notebook and monitor panels. The top and bottom channels swing to the top/bottom rails, respectively, and can be used as end-point gamma references. The middle channels are ideal for midpoint gamma references. The VCOM amplifier has a peak output current of 250 mA and can drive high impedance loads.
ANALOG DEVICES AD9662 handbook
AD9662 is a laser diode driver for high performance CD and DVD recordable drives. It includes three channels for three different optical power levels: the read channel generates a continuous output power level, whereas Channel 2 and Channel 3 are used as write channels having 0.8 ns rise/fall times. All channel currents are summed at the IOUT pin. Each channel’s output current is established by multiplying the channel’s input current and a current gain, where the current gain is controlled by the input current. The device is suitable for CD-RW, DVD-RW, DVD+RW and MO drives.
ANALOG DEVICES AD8393 handbook
The AD8393 is a low power, high output current, single-supply, ADSL-CO line driver that features ADI’s patent pending Adaptive Linear Power architecture. It has 4 power modes, and can achieve over 36V p-p differential output while processing signals with occasional peaks.
ANALOG DEVICES ADEL2020 handbook
ANALOG DEVICES AD8013 handbook
The AD8013 is a low power, single supply, triple video amplifier. Each of the three amplifiers has 30 mA of output current, and is optimized for driving one back terminated video load. It features excellent video specifications (RL = 150 Ohms), gain flatness of 0.1 dB to 60 MHz, differential gain error of 0.02%, and differential phase error of 0.06°.
ANALOG DEVICES OP220 handbook
The OP220 is a monolithic dual operational amplifier that can be used either in single or dual supply operation. Its low offset voltage and input offset voltage tracking (as low as 1.0 mV/∞C) make it the first micropower precision dual operational amplifier. Its excellent specifications make it very attractive in portable applications.
ANALOG DEVICES AD8391 handbook
The AD8391 is an xDSL line driver amplifier designed for single-supply xDSL systems. It operates on a voltage range of 3V to 12V and provides low distortion signals. It is suitable for low power applications such as line powered and battery backup systems. The amplifier outputs more than 250mA of current while maintaining -82dBc of SFDR at 100kHz on 12V. It also features a flexible power-down function controlled by a digital control line.
ANALOG DEVICES AD848/AD849 handbook
AD848/AD849 are high performance, low power monolithic operational amplifiers. AD848 is internally compensated for stable operation with closed-loop gains of 5 or greater. AD849 is fully decompensated for higher open-loop gains up to 63 dB.
ANALOG DEVICES AN-253 handbook
ANALOG DEVICES EVAL-ADDIFFAMP handbook
This document is a datasheet for the EVAL-ADDIFFAMP evaluation board which is a flexible board that can be used with a variety of circuit configurations.
ANALOG DEVICES AD8129/AD8130 handbook
AD8130/AD8129 are high-performance differential receiver amplifiers operating at up to 270 MHz, with low noise, high input impedance, high common-mode rejection ratio, and low distortion.
ANALOG DEVICES AN-232 handbook
ANALOG DEVICES ADD8702 handbook
ADD8702 is a 12-channel gamma buffer with VCOM buffer. It can generate programmable gamma reference voltages on 12 channels and perform mask programming. In addition, it has an adjustable VCOM buffer that can output high and low voltages on VCOM. The product's output current is 10mA, and the VCOM peak output current is 250mA. In addition, the product's output pins are compatible and can be used for fast load changes.
ANALOG DEVICES ADA4411-3 handbook
The ADA4411-3 is an integrated triple video filter and buffer with selectable cutoff frequencies and multiplexed inputs for RGB, HD/SD.
ANALOG DEVICES AD548 handbook
The AD548 is a low power, high precision monolithic operational amplifier that offers both low bias current (10 pA max, warmed up) and low quiescent current (200 µA max). It is fabricated with ion-implanted FET and laser wafer trimming technologies. Input bias current is guaranteed over the AD548's entire common-mode voltage range. The economical J grade has a maximum guaranteed input offset voltage of less than 2 mV and an input offset voltage drift of less than 20 µV/°C. This level of dc precision is achieved utilizing Analog's laser wafer drift trimming process. The combination of low quiescent current and low offset voltage drift minimizes changes in input offset voltage due to self-heating effects. The AD548 is recommended for any dual supply op amp application requiring low power and excellent dc and ac performance. In applications such as battery-powered, precision instrument front ends and CMOS, the AD548 is ideal.