Key facts
- Manuals
- 15
- Languages
- EN
- Last added
- 2023-10-19
Featured Newport Corporation manuals
Newport Corporation DL Controller Series Single-Axis Motion Controller GUI Manual
This manual provides step-by-step instructions for installing and using the DL Controller GUI on Windows 7, 8, and 10. It covers host computer configuration, software installation, connecting hardware, verifying communication ports, launching the GUI, and navigating its interface for motion control. It also includes troubleshooting and error recovery procedures for common operational issues.
The GUI allows users to initiate moves, adjust parameters, and manage controller states. It requires a USB driver to be installed before use and only supports standard PC screens. The manual includes detailed sections on motion commands, jogging, auto-step scanning, settings, and terminal commands for advanced control.
Covers: Introduction · Host Computer Configuration · Getting Started · GUI Description · Troubleshooting · Errors Recovery Guide
Newport Vision IsoStation™ User Manual
This manual provides step-by-step instructions for assembling, operating, and maintaining the Vision IsoStation™, a vibration-isolated workstation designed for sensitive instruments like interferometers and microscopes. It includes sections on unpacking, leveling, air supply setup, performance adjustments, maintenance, and troubleshooting common issues. The manual also details warranty terms and how to obtain factory service.
Safety precautions and installation guidelines are emphasized, including proper placement on level surfaces, avoiding vibration sources, and using appropriate air pressure (max 90 psig). The document includes diagrams and figures to assist with assembly and adjustment.
Covers: General Information · Unpacking and Assembly · Operation · Troubleshooting · Factory Service · Warranty Information
Newport Corporation IMS-LM Series High-Performance Long-Travel Linear Motor Stages User's Manual
This manual provides instructions for installing, connecting, and maintaining the IMS-LM Series linear motor stages. It includes safety warnings, mechanical specifications, and connection details for Newport controllers and other systems. Maintenance procedures and warranty information are also covered.
The stages are designed for high-precision applications and must be used within specified load and speed limits to avoid damage or injury. Proper grounding and packaging are required, and users are advised to contact Newport for repairs or calibration.
Covers: Warranty · EC Declaration of Conformity · Definitions and Symbols · Warnings · Cautions · Introduction
Newport SDM785-M 785 nm Spectrum Stabilized Laser Module User's Manual
This user manual provides instructions for operating and maintaining the Newport SDM785-M 785 nm spectrum stabilized laser module. It includes safety precautions, system features, setup procedures, and maintenance guidelines. The module is a Class 3B laser with output power up to 800 mW, designed for scientific applications like Raman spectroscopy. Users must follow safety protocols and wear appropriate laser safety eyewear.
Technical specifications cover performance, electrical, mechanical, and environmental parameters. The manual also details warranty terms, technical support contacts, and service procedures for troubleshooting and repairs.
Covers: Safety Precautions · Features & Specifications · Getting Started · System Operation · Maintenance and Service · Technical Support Contacts
Latest Newport Corporation manuals
Newport Corporation DL Controller Series Single-Axis Motion Controller GUI Manual
User Manual 26 pages · 2.4 MB · ENUser guide for the Newport DL Controller Series GUI, covering setup, connection, and operation of single-axis motion controllers for delay line stages.
Newport Vision IsoStation™ User Manual
User Manual 26 pages · 746 KB · ENUser manual for Newport's Vision IsoStation™ vibration-isolated workstation, covering setup, operation, maintenance, and troubleshooting.
Newport Corporation IMS-LM Series High-Performance Long-Travel Linear Motor Stages User's Manual
User Manual 28 pages · 2.1 MB · ENUser manual for Newport Corporation's IMS-LM Series high-performance linear motor stages, covering installation, connection, maintenance, and safety warnings.
Newport SDM785-M 785 nm Spectrum Stabilized Laser Module User's Manual
User Manual 22 pages · 628 KB · ENUser manual for Newport's 785 nm spectrum stabilized laser module, covering safety, operation, maintenance, and specifications.
Newport Corporation DC Interface Box User Manual
User Manual 38 pages · 3.9 MB · ENUser manual for the DC Interface Box compatible with MM2000 and ESP6000 motion controllers.
Newport Corporation LTA Series Precision Long-Travel & High-Speed Motorized Actuators Service Manual
Service Manual 34 pages · 3.6 MB · ENService manual for Newport Corporation's LTA Series actuators, covering warranty, specifications, maintenance, and safety warnings.
Newport Corporation HXP100P-MECA 6-Axis-Parallel Kinematic Positioning System User Manual
User Manual 18 pages · 3 MB · ENUser manual for the HXP100P-MECA 6-axis hexapod positioning system by Newport Corporation, covering operation, safety, maintenance, and warranty.
Newport Corporation HXP100-MECA 6-Axis-Parallel Kinematic Positioning System User Manual
User Manual 18 pages · 2.7 MB · ENUser manual for the HXP100-MECA hexapod, covering setup, operation, safety, and maintenance for six-axis parallel kinematic positioning.
Newport Corporation IMS Series High-Performance Long-Travel Linear Stages User Manual
User Manual 30 pages · 3.2 MB · ENUser manual for Newport Corporation's IMS Series high-performance long-travel linear stages, covering setup, operation, maintenance, and warranty details.
Newport Corporation RV Series High-Performance Precision Rotation Stages User's Manual
User Manual 42 pages · 2.5 MB · ENUser manual for Newport Corporation’s RV Series high-performance precision rotation stages, covering operation, mounting, maintenance, and safety.
Newport Corporation SR50 Series Compact High-Resolution Rotation Stages User’s Manual
User Manual 24 pages · 1.7 MB · ENUser manual for Newport Corporation’s SR50 Series compact high-resolution rotation stages, covering operation, connection, maintenance, and safety warnings.
Newport Faraday Isolator Low Power ISO Series User Manual
User Manual 14 pages · 720 KB · ENUser manual for Newport's Faraday Isolator Low Power ISO Series, covering warranty, safety, operation, and specifications.
Newport Corporation SDM808-H Laser Module User's Manual
User Manual 23 pages · 640 KB · ENUser manual for the Newport SDM808-H 808 nm stabilized laser module, covering safety, operation, maintenance, and specifications.
Newport SDM532-L 532 nm Spectrum Stabilized Laser Module User's Manual
User Manual 22 pages · 621 KB · ENUser manual for Newport's SDM532-L 532 nm laser module, covering safety, operation, maintenance, and specifications.
Newport Corporation DL Controller Series USB Driver Installation Manual
Installation Guide 16 pages · 1.4 MB · ENInstallation guide for USB drivers for Newport's DL Controller Series on Windows 7, 8.1, and 10.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Service Manual
Disassembly, diagnostics and part numbers, for repair.
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in Newport Corporation manuals
What operating systems does the DL Controller GUI support?
The DL Controller GUI runs on Windows 7, 8, and 10 platforms.
From: Newport Corporation DL Controller Series Single-Axis Motion Controller GUI Manual
What is required before running the GUI?
The USB driver must be installed on your computer before running the GUI.
From: Newport Corporation DL Controller Series Single-Axis Motion Controller GUI Manual
What air pressure is required for the Vision IsoStation™?
The maximum operating pressure is 90 psig (6.3 kg/cm²). Bottled nitrogen or mechanically compressed air may be used.
What is the Vision IsoStation™ used for?
It provides an ideal working platform for vibration-influenced devices such as interferometers, microscopes, and balances.
What is the warranty period for the IMS-LM Series?
Newport Corporation warrants this product to be free from defects in material and workmanship for a period of 1 year from the date of shipment.
From: Newport Corporation IMS-LM Series High-Performance Long-Travel Linear Motor Stages User's Manual
What are the operating temperature limits for the IMS-LM Series?
The operating temperature is +10 to +35 °C.
From: Newport Corporation IMS-LM Series High-Performance Long-Travel Linear Motor Stages User's Manual