Philips Manuals (Industrial)

This document is about TDA1547N supplier

File format: PDF Size:396 KB

TDA1547 is a dual top-performance bitstream DAC suitable for high-quality audio systems. It features low harmonic distortion, high signal-to-noise ratio, and wide dynamic range.

File format: PDF Size:103 KB

This document describes the Philips Semiconductors TDA1546T Bitstream Continuous Calibration DAC with digital sound processing (BCC-DAC), including its easy application, high performance, and digital sound processing features. The chip includes volume control, sound processing, and sound monitoring capabilities.

File format: PDF Size:328 KB

This document is for TDA1545A, it introduces the features of TDA1545A, including space saving packages, low power consumption, low total harmonic distortion, wide dynamic range, continuous calibration concept, easy application, fast settling time, internal bias current, wide operating temperature range, compatible with most Japanese input formats, and no zero crossing distortion.

File format: PDF Size:105 KB

TDA1543 is a low distortion, 16-bit dynamic range, 4 times oversampled digital-to-analog converter (DAC) designed by Philips Semiconductors for use in high-fidelity digital audio equipment such as Compact Disc players, digital tape or cassette recorders, digital sound in TV sets and in digital amplifiers.

File format: PDF Size:83 KB

TDA1541A is a high-performance 16-bit digital-to-analog converter (DAC) produced by Philips Semiconductors. The product has high sound quality, high performance, low noise and distortion, wide dynamic range, selectable two-channel input format and TTL compatible inputs.

File format: PDF Size:130 KB

TDA1541A is a 16-bit digital-to-analog converter (DAC) produced by Philips Semiconductors. It has high sound quality, high performance, low noise and distortion, wide dynamic range, 4× or 8× oversampling, selectable two-channel input format and TTL compatible inputs.

File format: PDF Size:130 KB

File format: PDF Size:243 KB

TDA1524A is an active stereo-tone/volume control circuit designed for car radios, TV receivers, and mains-fed equipment. It includes functions for bass and treble control, volume control with built-in contour (can be switched off), and balance. All these functions can be controlled by d.c. voltages or by single linear potentiometers.

File format: PDF Size:272 KB

TDA1524A is an active stereo-tone/volume control circuit designed for car radios, TV receivers, and mains-fed equipment. It includes functions for bass and treble control, volume control with built-in contour (can be switched off), and balance. All these functions can be controlled by d.c. voltages or by single linear potentiometers.

File format: PDF Size:205 KB

TDA1523 is a preamplifier for car radio/cassette players produced by Philips. Its features are two independent amplifiers with an open-loop gain of 90dB, internal DC feedback via a 140 kΩ resistor from output to feedback point, AC characteristics that can be determined externally by an RC network, electronic on/off switching with transient suppression for switch on, head input at DC ground that eliminates the input coupling capacitor, minimum external component requirement, stability down to a gain of 30 dB, low input noise, low distortion, and DC input current less than 2µA.

File format: PDF Size:99 KB

TDA1522 is a playback amplifier for car radio/cassette players. It features two independent amplifiers with an open-loop gain of 90 dB (typical), internal DC feedback via a 140 kΩ resistor, AC characteristics determined by an external RC network, electronic on/off switching with transient suppression, head input at DC ground, minimum external component requirement, stability down to a gain of 30 dB, low input noise and distortion, and a wide supply voltage range.

File format: PDF Size:98 KB

TDA1521A is a dual hi-fi audio power amplifier from Philips Semiconductors. It has a power of 2 x 6 W and the following features: very few external components are required, input is muted during power on and off (no switch-on or switch-off clicks), low offset voltage between output and ground, excellent gain balance between channels, Hi-fi according to IEC 268 and DIN 45500 standards, short-circuit-proof and thermally protected.

File format: PDF Size:126 KB

TDA1521/TDA1521Q is a dual hi-fi audio power amplifier encapsulated in a 9-lead plastic power package, especially designed for mains fed applications (e.g. stereo tv sound and stereo radio).

File format: PDF Size:145 KB

The TDA1519C is a 22W BTL or 2×11W stereo power amplifier. It requires very few external components for Bridge-Tied Load (BTL) or stereo application. It has high output power, low offset voltage at output, fixed gain, good ripple rejection, mute/standby switch, load dump protection, and AC and DC short-circuit-safe to ground and VP, among other features.

File format: PDF Size:119 KB

TDA1519B is a 12W BTL or 2x6W stereo car radio power amplifier. It features high output power, low offset voltage, fixed gain, good ripple rejection, etc.

File format: PDF Size:109 KB

The TDA1519 is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic medium power package, primarily developed for car radio applications. It features high output power, requires very few external components, has good ripple rejection, mute/stand-by switch, load dump protection, AC and DC short-circuit-safe to ground and VP, thermal protection, reverse polarity safe, capability to handle high energy on outputs (VP = 0 V), no switch-on/switch-off plop, and is protected against electrostatic discharge.

File format: PDF Size:78 KB

TDA1519A is a dual output power amplifier from Philips. It is designed for car radio applications. The product features high output power, low output offset voltage, fixed gain, good ripple rejection and load dump protection.

File format: PDF Size:132 KB

The document describes the TDA1518BQ, an integrated power amplifier primarily developed for car radio applications. The product features include few external components requirement, flexibility in use (stereo and mono BTL), high output power, low output offset voltage, fixed gain, good ripple rejection, mute/stand-by switch, load dump protection, A.C. and d.c. short-circuit safety, thermal protection, reverse polarity safety, capability to handle high energy on outputs, no switch-on/switch-off plop, flexible leads, low thermal resistance, and identical inputs (inverting and non-inverting).

File format: PDF Size:85 KB

TDA1517ATW is an integrated class-AB output amplifier produced by Philips Semiconductors. The chip has high output power, low output offset voltage, good ripple rejection, safe AC and DC short circuit protection, electrostatic discharge protection, thermal protection, reverse polarity safe, and can handle high energy output. It is widely used in multimedia applications.

File format: PDF Size:133 KB