Philips Manuals (Industrial)

The TDA1020 is a 12W car audio amplifier from PHILIPS. It is packaged in a 9-lead SIL and can be powered by a voltage range of 6-18V. It can drive 4Ω and 2Ω loads with a power of 7W and 12W respectively. The TDA1020 features frequency limiting, thermal protection, and short-circuit protection.

File format: PDF Size:73 KB

The TDA1023/T is a bipolar integrated circuit from Philips Semiconductors for controlling triacs in a proportional time or burst firing mode. It allows precise temperature control of heating equipment and is especially suited to the control of panel heaters. It generates positive-going trigger pulses but complies with regulations regarding mains waveform distortion and RF interference.

File format: PDF Size:272 KB

File format: PDF Size:0 KB

TDA1015T is a low-cost audio amplifier chip produced by Philips Semiconductors. Its features are small output power (0.5W), high input impedance (16Ω), and can be applied to portable devices such as radios and recorders.

File format: PDF Size:72 KB

TDA1015 is an integrated audio power amplifier chip produced by Philips. It is packaged in a single-inline plastic package. The operating voltage range is 3.6-18V, the maximum output current is 2.5A, and the maximum output power is 4W. It can be used in portable radios and recorders.

File format: PDF Size:258 KB

TDA1013B is an integrated audio amplifier circuit with DC volume control. It is encapsulated in a 9-lead single in-line (SIL) plastic package, making it ideal for mains and battery-fed apparatus such as television receivers and record players. The circuit has a wide supply voltage range, and the DC volume control stage has a logarithmic control characteristic with a range of more than 80 dB, controlled by a DC voltage variable between 2 and 6.5 V. The audio amplifier has a well-defined open-loop gain and a fixed integrated closed loop. It requires only a few external components and offers stability and performance.

File format: PDF Size:115 KB

TDA1011 is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4 Ω load impedance.

File format: PDF Size:294 KB

TDA1010A is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package produced by Philips Semiconductors. It can be used as a 6 W car radio amplifier for use with 4 Ω and 2 Ω load impedances, or as a record player and tape recorder with output powers up to 10 W.

File format: PDF Size:594 KB

This document is the datasheet for TDA10085HT, a single chip demodulator and forward error correction compliant with DSS and DVB-S.

File format: PDF Size:94 KB

TDA10021HT is a DVB-C channel receiver produced by Philips Semiconductors. It supports 4, 16, 32, 64, 128 and 256 Quadrature Amplitude Modulation (QAM) demodulators, high performance 256 QAM, especially for direct IF applications.

File format: PDF Size:91 KB

This data sheet introduces the features and characteristics of the TDA10045H DVB-T channel receiver

File format: PDF Size:95 KB

TDA1001B is a monolithic integrated circuit for suppressing interference and noise in FM mono and stereo receivers.

File format: PDF Size:100 KB

The TEA1622P is a Switched Mode Power Supply (SMPS) controller IC that operates directly from the rectified universal mains. It is implemented in the high voltage EZ-HV™ SOI process, combined with a low voltage BICMOS process. The device includes a high voltage power switch and a circuit for start-up directly from the rectified mains voltage. A dedicated circuit for valley switching is built in, which makes a very efficient slim-line electronic power-plug concept possible. In its most basic version of application, the TEA1622P acts as a voltage source. Here, no additional secondary electronics are required. A combined voltage and current source can be realized with minimum costs for external components. Implementation of the TEA1622P renders an efficient and low cost power supply system.

File format: PDF Size:69 KB

The TEA1620P is a Switched Mode Power Supply (SMPS) controller IC that operates directly from the rectified universal mains. It is implemented in the high voltage EZ-HV™ SOI process, combined with a low voltage BICMOS process. The device includes a high voltage power switch and a circuit for start-up directly from the rectified mains voltage. A dedicated circuit for valley switching is built in, which makes a very efficient slim-line electronic power-plug concept possible. In its most basic version of application, the TEA1620P acts as a voltage source. Here, no additional secondary electronics are required. A combined voltage and current source can be realized with minimum costs for external components. Implementation of the TEA1620P renders an efficient and low cost power supply system.

File format: PDF Size:69 KB

This data sheet provides detailed information on TEA1610P and TEA1610T, including product features, applications, etc.

File format: PDF Size:114 KB

TEA1566 is an integrated circuit with features such as high integration and low power consumption, suitable for offline power supply applications.

File format: PDF Size:177 KB

This is a product specification sheet that describes the features and characteristics of the TEA1552 GreenChip II SMPS control IC. The IC operates with universal mains supply (70 to 276 V AC) and has a high level of integration, resulting in a low external component count. It incorporates several green features such as valley or zero voltage switching for minimum switching losses, efficient quasi-resonant operation at high power levels, frequency reduction at low power standby for improved system efficiency, and cycle skipping mode at very low loads. It also includes various protection features like safe restart mode, continuous mode protection, overvoltage protection, short winding protection, undervoltage protection, overtemperature protection, and adjustable overcurrent protection. The IC is suitable for applications such as adapters and chargers for laptops, camcorders, printers, and other devices that require efficient and reliable power control.

File format: PDF Size:124 KB

TEA1541 is a switch power supply control IC with synchronization function produced by Philips Semiconductors. It has the characteristics of universal power supply, high integration, low power consumption and high reliability.

File format: PDF Size:104 KB

TEA1533T and TEA1533AT are high integrated green power management chips, mainly used in adapter and charger products. They have a wide input voltage range, high efficiency and complete protection functions.

File format: PDF Size:126 KB

TEA1533P and TEA1533AP are green chip TMII SMPS control ICs with universal mains supply operation, high level of integration and green features.

File format: PDF Size:122 KB