hittite Manuals (Industrial)

The HMC165S14 is a low-cost GaAS MMIC SP4T switch from Hittite. It is suitable for antenna diversity, switched filter banks, gain/attenuation selection, and general channel multiplexing applications. The switch supports DC-2.0GHz frequency range, has a maximum input power of 22dBm, and a typical insertion loss of 0.3dB. The typical switching time is 25ns.

File format: PDF Size:57 KB

The HMC158C8 is a miniature frequency doubler MMIC suitable for applications such as wireless local loop, LMDS, VSAT, point-to-point radios, and test equipment. It features small size, requires no DC bias, and suppresses undesired fundamental and higher order harmonics.

File format: PDF Size:1161 KB

The HMC158 is a GaAs MMIC SMT passive frequency doubler from Hittite with a frequency range of 1.3-4.0GHz, an input drive level of 10-20dBm and an output frequency range of 3.4-8.0GHz. The conversion loss is 15dB and the 3FO and 4FO isolation is 40dB.

File format: PDF Size:164 KB

The HMC157C8 is a miniature frequency doubler in a non-hermetic ceramic surface mount package. It suppresses undesired fundamental and higher order harmonics with respect to input signal level and desired output signal level. The doubler uses the same diode/balun technology used in Hittite MMIC mixers, features small size, and requires no DC bias.

File format: PDF Size:65 KB

The HMC156C8 is a miniature frequency doubler in a non-hermetic ceramic surface mount package. It is suitable for wireless local loop, LMDS, VSAT, and Pt to Pt radios, UNII & HiperLAN, and test equipment. Its frequency range is 0.7-2.4GHz, input drive level is 10 to 20dBm, conversion loss is 15dB, and 3Fo, 4Fo isolation is 38dB.

File format: PDF Size:125 KB

File format: PDF Size:114 KB

HMC141C8 is a miniature passive double-balanced mixer from Hittite Microwave Corporation that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range and can handle larger signal levels than most active mixers due to the high third order intercept of 20 dBm.

File format: PDF Size:135 KB

HMC141/HMC142 is a miniature double-balanced mixer chip produced by Hittite Microwave Corporation. It is suitable for UNII, HiperLAN, microwave and millimeter wave radios, military, aerospace and test equipment applications. It has the characteristics of miniaturization, broadband, high isolation and high reliability.

File format: PDF Size:114 KB

HMC142C8 is a double-balanced mixer produced by Hittite Microwave Corporation. It features high dynamic range and high third order intercept power, suitable for microwave point-to-point radios and satellite ground equipment.

File format: PDF Size:135 KB

This document describes the features and characteristics of the HMC143 and HMC144 chips, which are miniature double-balanced mixers suitable for applications such as microwave point-to-point radios and VSAT. The chips utilize a standard 1um GaAs MESFET process and provide broadband operation and excellent isolation. They are smaller and more reliable replacements for hybrid diode mixers.

File format: PDF Size:112 KB

The document introduces the features and characteristics of the HMC147S8 microwave mixer, which is suitable for base station and portable wireless applications due to its small size and zero DC bias requirement. The mixer provides exceptional isolation and intermodulation performance and can be used as an upconverter or downconverter, as well as a biphase modulator/demodulator or phase comparator.

File format: PDF Size:76 KB

The HMC154S8 is a low-cost, low-distortion GaAs MMIC SMT switch with DC-2.5GHz operation for use in transmit-receive applications requiring very low distortion at high signal power levels. The device is especially suited for 900 MHz and 1.8-2.2 GHz applications. The design provides exceptional inter-modulation performance; providing a +60dBm third order intercept at 8 Volt bias.

File format: PDF Size:164 KB

The HMC156 is a GaAs MMIC passive frequency doubler with an input frequency range of 0.7-2.4GHz, an output frequency range of 1.4-4.6GHz, a conversion loss of 15 dB, and 3Fo and 4Fo isolation of 38 dB. The input drive level is 10 to 20 dBm.

File format: PDF Size:74 KB

The HMC213MS8 is an ultra miniature double-balanced mixer ideal for base stations, PCMCIA transceivers, and wireless local loop applications. It features a conversion loss of 8.5 dB and LO/RF isolation of 40 dB.

File format: PDF Size:189 KB

The HMC136 is a GaAs MMIC BI-PHASE MODULATOR, which works in the 4 - 8 GHz band, has 30 dB of carrier suppression, and can be directly integrated into MIC circuits. It can also be used as a phase detector.

File format: PDF Size:107 KB

HMC135 is a GaAs MMIC Bi-Phase Modulator produced by Hittite. It can be directly integrated into MIC circuits, directly modulated in the 1.8-5.2 GHz band, and has a carrier suppression ratio of 30 dB. The device can also be used as a phase detector.

File format: PDF Size:120 KB

This product is a HMC132G7 and HMC132P7 surface mounted GaAS MMIC high isolation SPDT switch, which has 40 dB isolation, 0.5 to 6GHz bandwidth, and typical switching time of 63 ns.

File format: PDF Size:59 KB

The HMC132C8 is a surface mount, low cost, non-hermetic packaged version of the HMC132G7 MMIC SPDT switch. The device is a fast, broadband SPDT switch featuring high (> 42 dB) isolation over the entire band. The switch is non-reflective at both RF1 and RF2 ports. Applications for this device include T/R switching for 5.2 GHz UNII, 5.8 GHz ISM circuits, WLAN, and S,C and X-Band Telecom radios.

File format: PDF Size:68 KB

This document describes the features and functionality of the HMC130 GaAs MMIC double-balanced mixer, including conversion loss, isolation, and input IP3. The mixer is suitable for applications such as microwave and VSAT radios, test equipment, military electronic warfare, and space telecommunications.

File format: PDF Size:168 KB

HMC129G8 is a miniature double-balanced mixer in a hermetic surface mount package from Hittite Microwave Corporation. It can be used as an upconverter or downconverter. It is a passive diode/balun type mixer with high dynamic range and can handle larger signal levels than most active mixers.

File format: PDF Size:114 KB