ANALOG Manuals (Industrial)

The AD5247 is a 128-position I2C-compatible digital potentiometer from Analog Devices. It has four resistance ranges of 5kΩ, 10kΩ, 50kΩ, and 100kΩ, 2.7V to 5.5V single supply voltage, and a wide operating temperature range of -40°C to +125°C. It consumes a typical current of 0.9µA.

File format: PDF Size:483 KB

The AD5246 is a 128-position I2C compatible digital resistor with four resistor values of 5kΩ, 10kΩ, 50kΩ, and 100kΩ. It is packaged in a 2mm×2.1mm SC70-6 and supports the I2C interface. It also supports full read/write of the wiper register, and automatically sets the wiper to the midscale position when the power is turned on. The operating voltage range is 2.7V to 5.5V, the temperature coefficient is 45ppm/°C in rheostat mode, the typical operating current is 0.9µA, and the operating temperature range is -40°C to +125°C.

File format: PDF Size:365 KB

AD5162 is a 256-bit dual-channel SPI digital potentiometer from ADI. It has four resistance values of 2.5 kΩ, 10 kΩ, 50 kΩ and 100 kΩ, and is packaged as a 10-lead MSOP. Its features include: fast settling time, full read / write of wiper register, power-on preset to midscale, single supply, low power, wide temperature range, and qualified for automotive applications.

File format: PDF Size:825 KB

AD5243/AD5248 is a dual-channel, 256-position, I2C-compatible digital potentiometer. It features a compact package, fast settling time, low power consumption, etc. It is suitable for applications such as system calibration, electronics level settings, mechanical trimmer replacement, permanent factory PCB setting, transducer adjustment, etc.

File format: PDF Size:797 KB

AD5170 is a 256-position digital potentiometer with two-time programming and I2C interface produced by Analog Devices.

File format: PDF Size:764 KB

The AD5253/AD5254 are quad 64-/256-position I2C nonvolatile memory digital potentiometers with resistance values of 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ. They are designed for use in audio and video mixers, equalizers, amplifier preamplifiers, and audio control applications.

File format: PDF Size:610 KB

The document describes the features and characteristics of the AD5228, a 32-position manual up/down control potentiometer. It includes 10 kΩ, 50 kΩ, and 100 kΩ end-to-end terminal resistance, simple manual control, built-in adaptive debouncer, discrete step-up/step-down control, autoscan up/down control, pin-selectable zero-scale/midscale preset, low potentiometer mode tempco, low rheostat mode tempco, digital control compatibility, ultralow power, low operating voltage, automotive temperature range, and compact thin package.

File format: PDF Size:435 KB

The 64-position OTP digital potentiometer AD5171 is a low-cost digital potentiometer that can be programmed via an I2C-compatible digital interface. The product has four resistance values available: 5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ, and can be used for system calibrations and electronic level settings.

File format: PDF Size:990 KB

AD5165 is a ultralow power digital potentiometer from Analog Devices, with a working voltage of 1.8V, a maximum resistance of 100kΩ and supports 256 positions, suitable for battery powered electronic devices, remote utility meter adjustment, mechanical potentiometer replacement, transducer circuit adjustment, automotive electronic equipment adjustment, gain control and offset adjustment, system calibration, VCXO adjustment and other applications.

File format: PDF Size:570 KB

The AD5251/AD5252 are dual 64/256-position I2C nonvolatile memory digital potentiometers with 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ resistance ranges and nonvolatile memory that stores wiper setting with write protection.

File format: PDF Size:574 KB

AD5259 is a non-battery 256-position digital potentiometer from Analog Devices, features 256 positions, I2C-compatible interface, 5kΩ/10kΩ/50kΩ/100kΩ four resistance values, ±1% accuracy, ≤1ms EEPROM refresh time, 100 years typical data retention time, 3V~5V single power supply, etc., suitable for LCD panel VCOM adjustment, LCD panel brightness and contrast control, mechanical potentiometer replacement, programmable power supply, RF amplifier biasing, etc. applications

File format: PDF Size:481 KB

The AD5258 is a nonvolatile, I2C-compatible 64-position digital potentiometer with compact packaging and multiple features, suitable for applications such as LCD panel adjustment, power supply adjustment, and RF amplifier biasing.

File format: PDF Size:417 KB

The AD5290 is a high voltage, high performance digital potentiometer with 256 positions and resistance ranges of 10kΩ, 50kΩ, and 100kΩ. It can operate on a single supply of +20 V to +30 V or dual supplies of ±10 V to ±15 V. It utilizes the low temperature coefficient iCMOS™1 process technology and features a compact MSOP-10 package and automotive temperature range of -40°C to +125°C.

File format: PDF Size:494 KB

The AD5293 is a single-channel digital potentiometer with 1024-position resolution and 1% R-tolerance. It features a SPI-compatible serial interface and can be used as a replacement for mechanical potentiometers for applications such as gain and offset adjustment, programmable voltage-to-current conversion, programmable filters, delays, and time constants, as well as sensor calibration.

File format: PDF Size:932 KB

The AD7533 is a low-cost, 10-bit multiplying DAC with good linearity and low power dissipation. It can interface with TTL or CMOS and is suitable for applications such as digitally controlled attenuators, programmable gain amplifiers, function generation, and linear automatic gain controls.

File format: PDF Size:347 KB

The AD7524 is a low-cost, 8-bit monolithic CMOS DAC designed for direct interface to most microprocessors. It is basically an 8-bit DAC with input latches, and its load cycle is similar to the 'write' cycle of a random access memory. Using an advanced thin-film on CMOS fabrication process, the AD7524 provides accuracy to 1/8 LSB with a typical power dissipation of less than 10 milliwatts.

File format: PDF Size:163 KB

AD558 is a 10-bit digital-to-analog converter from American ADI, with 8-bit resolution, 0 to 10 volt output range, maximum output current of 5 mA, and output can be pulled down to ground internally.

File format: PDF Size:834 KB

This document provides information on the electrical characteristics of REV. D DAC10, including resolution, nonlinearity, settling time, output voltage, etc.

File format: PDF Size:455 KB

This product is a CMOS dual 8-bit buffered multiplying DAC with features of +5 V to +15 V operating voltage range, DAC accuracy of 1%, four quadrant multiplication, TTL/CMOS compatible latch, applications in digital control of gain/attenuation filter parameters, stereo audio circuits and X-Y graphics.

File format: PDF Size:189 KB

The LOGDAC AD7111/AD7111A are monolithic multiplying D/A converters featuring wide dynamic range in a small pack- age. Both DACs can attenuate an analog input signal over the range 0 dB to 88.5 dB in 0.375 dB steps. They are available in 16-pin DIPs and SOIC packages. The AD7111 is also available in a 20-terminal LCCC package.

File format: PDF Size:176 KB