ANALOG Manuals (Industrial)

The DAC8412/DAC8413 are quad, 12-bit voltage output DACs with readback capability. Built using a complementary BiCMOS process, these monolithic DACs offer the user very high package density. Output voltage swing is set by the two reference inputs VREFH and VREFL. By setting the VREFL input to 0 V and VREFH to a positive voltage, the DAC provides a unipolar positive output range. A similar configuration with VREFH at 0 V and VREFL at a negative voltage provides a unipolar negative output range. Bipolar outputs are configured by connecting both VREFH and VREFL to nonzero voltages. This method of setting output voltage range has advantages over other bipolar offsetting methods because it is not dependent on internal and external resistors with different temperature coefficients. Digital controls allow the user to load or read data.

File format: PDF Size:532 KB

AD7568 is an 8-bit eight-channel DAC with 4-quadrant multiplication, single +5V power supply, low power consumption, serial interface, multiple update and reset function.

File format: PDF Size:350 KB

This file introduces the features of DAC8512. DAC8512 is a 12-bit digital-to-analog converter from Analog Devices, which operates on a single +5V supply and offers low power, low cost and ease of use.

File format: PDF Size:758 KB

File format: PDF Size:0 KB

The AD7249 DACPORT is an integrated device that includes a pair of 12-bit voltage output DACs, output amplifiers, and a Zener voltage reference. It features high accuracy, no external trimming required, and compact size.

File format: PDF Size:150 KB

The AD660 DACPORT® is a 16-bit serial/byte monolithic digital-to-analog converter (DAC) with the following features: complete 16-bit digital-to-analog function, on-chip output amplifier, on-chip buried Zener voltage reference, ±1 LSB integral linearity, 15-bit monotonic over temperature, microprocessor compatible, serial or byte input, double-buffered latches, fast (40 ns) write pulse, asynchronous clear (to 0 V) function, serial output pin facilitates daisy-chaining, unipolar or bipolar output, low glitch: 15 nV-s, low total harmonic distortion (THD) + noise: 0.009%

File format: PDF Size:332 KB

This is the functional block diagram of AD8582. It is a complete dual 12-bit DAC with no external components, single +5V operation, 1 mV/Bit with 4.095 V full scale, true voltage output, ±5 mA drive, and very low power consumption: 5 mW.

File format: PDF Size:310 KB

The AD8842 is an 8-bit octal, 4-quadrant multiplying, CMOS TrimDAC that features low cost, replaces 8 potentiometers, 50 kHz 4-quadrant multiplying bandwidth, low zero output error, eight individual channels, 3-wire serial input, 500 kHz update data loading rate, ±3 V output swing, midscale preset, zero volts out.

File format: PDF Size:1193 KB

The AD8600 is a 16-channel 8-bit multiplying digital-to-analog converter (DAC) with 16 independently addressable voltage output channels. The full-scale value is set by an external reference voltage and it has a settling time of 2 µs. It features double buffered 8-bit parallel input, high-speed data load rate, data readback, and can operate from a single +5 V supply or optional ±6 V supply. It is commonly used in applications such as phased array ultrasound and sonar, power level setting, receiver gain setting, automatic test equipment, and LCD clock level setting.

File format: PDF Size:127 KB

The AD8522 is a complete dual 12-bit, single-supply, serial input DAC. The device features serial input, single supply, low power, gain calibration and zero calibration, 12-bit resolution, 12-bit linearity, 1 ppm/°C temperature coefficient and 2.5V reference output.

File format: PDF Size:241 KB

The AD8300 is a complete 12-bit, voltage-output digital-to-analog converter designed to operate from a single +3 volt supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease-of-use in single-supply +3 volt systems. Operation is guaranteed over the supply voltage range of +2.7 V to +5.5 V making this device ideal for battery-operated applications. The 2.0475 V full-scale voltage output is laser trimmed to maintain accuracy.

File format: PDF Size:246 KB

AD7564 is a device that integrates four 12-bit DACs with features such as four-quadrant multiplication, separate reference voltage inputs, single supply operation, low power consumption, and versatile interfaces.

File format: PDF Size:464 KB

File format: PDF Size:0 KB

AD760 is a 16/18-bit self-calibrating serial/byte DACPORT device introduced by Analog Devices in 1995.

File format: PDF Size:325 KB

The 12-channel AD8802/AD8804 is a 20-pin device that provides independent digitally-controllable voltage outputs. It allows replacement of the mechanical trimmer function in new designs and is ideal for dc voltage adjustment applications. Easily programmed by serial interfaced microcontroller ports, the AD8802 with its midscale preset is ideal for potentiometer replacement where adjustments start at a nominal value. It is suitable for applications such as gain control of video amplifiers, voltage controlled frequencies and bandwidths in video equipment, geometric correction and automatic adjustment in CRT computer graphic displays.

File format: PDF Size:433 KB

File format: PDF Size:0 KB

File format: PDF Size:0 KB

AD7836 is a quad 14-bit DAC with voltage outputs. It supports separate offset adjust for each output, reference range of ±5 V, maximum output voltage range of ±10 V, clear function to user-defined code, and 44-pin MQFP package.

File format: PDF Size:175 KB

The AD9762 is a 12-bit resolution member of the TxDAC series of high performance differential analog-to-digital converters. It features 125 MSPS update rate, a bandwidth of 70 dBc at 5 MHz output frequency. It is single supply, low power, and small package. It is suitable for applications such as base stations, ADSL/HFC modems, direct digital synthesis (DDS), etc.

File format: PDF Size:423 KB

AD9760 is a 10-bit resolution member of the TxDAC series of high performance, low power CMOS digital-to-analog converters (DACs).

File format: PDF Size:409 KB