Key facts
- Brand
- UBIQUITI NETWORKS
- Model
- ERPro-8
- Category
- Router
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2026-11-02
Start here

Ubiquiti Networks EdgeRouter PRO ERPro-8 Quick Start Guide
This guide helps you install and configure the Ubiquiti Networks EdgeRouter PRO ERPro-8. It covers hardware overview, LED indicators, SFP port usage, and accessing the EdgeOS configuration interface via web browser. The router features 8 RJ45 ports and 2 hot-swappable SFP ports, with support for 10/100/1000 Ethernet and fiber connections.
Installation requires connecting power, mounting the device, and connecting an Ethernet cable to eth0. Access the web interface at https://192.168.1.1 using credentials 'ubnt' for login. The guide also includes reset procedures and compliance certifications.
Ubiquiti Networks ERPro-8 specifications
| Dimensions | 484 x 164 x 44 mm (19.06 x 6.46 x 1.73") |
|---|---|
| Weight | 2.3 kg (5.07 lb) |
| Max. Power Consumption | 40 W |
| Processor | Dual-Core 1 GHz, MIPS64 with Hardware Acceleration for Packet Processing |
| System Memory | 2 GB DDR3 RAM |
| Code Storage | 4 GB |
| Operating Temperature | -10 to 45° C (14 to 113° F) |
| Operating Humidity | 10 - 90% Noncondensing |
| Power Method | 110 - 240VAC |
| Power Supply | Internal AC/DC Power Adapter, 60 W (24V, 2.5A) |
Source: Ubiquiti Networks EdgeRouter PRO ERPro-8 Quick Start Guide
All Ubiquiti Networks ERPro-8 documents by type
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
What happens when I plug an SFP module into an SFP port?
The SFP port becomes active, and the corresponding RJ45 port is deactivated.
From: Ubiquiti Networks EdgeRouter PRO ERPro-8 Quick Start Guide
How do I reset the EdgeRouter PRO to factory defaults?
Press and hold the Reset button for 10 seconds until the right LED on RJ45 port eth7 starts flashing and becomes solidly lit. The device will reboot automatically.
From: Ubiquiti Networks EdgeRouter PRO ERPro-8 Quick Start Guide
What cabling is recommended for outdoor applications?
For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.
From: Ubiquiti Networks ERPro-8 8-Port Router Quick Start Guide
What happens if an SFP module is plugged into the SFP port?
If an SFP module is plugged in, the SFP port becomes active, and the corresponding RJ45 port is deactivated.
From: Ubiquiti Networks ERPro-8 8-Port Router Quick Start Guide
