Key facts
Start here

SMC ZSE20(F) ISE20 Digital Pressure Switch User Manual
This manual covers safety precautions, model designation, and a detailed description of each part of the digital pressure switch. It explains terminology, installation steps, pipe and wiring methods, and the various configuration options available for both ZSE20(F) and ISE20 models.
The document also includes setting procedures for pressure ranges, function‑selection modes, factory defaults, maintenance tips, a fault list, and full technical specifications such as pressure ranges, output limits, operating temperature and data retention. This manual is written in Chinese.
SMC ZSE2 specifications
| Pressure range (positive pressure, ISE20) | -0.100 ~ 1.000 MPa |
|---|---|
| Pressure range (vacuum, ZSE20) | 0.0 ~ -101.0 kPa |
| Pressure range (mixed, ZSE20F) | -100.0 ~ 100.0 kPa |
| Maximum output voltage | 28 V |
| Maximum output current (NPN) | 80 mA |
| Maximum output current (PNP) | 80 mA |
| Data write cycles | 10 000 cycles |
| Data retention period | 20 years |
| Operating temperature range | -5 °C ~ 50 °C |
Source: SMC ZSE20(F) ISE20 Digital Pressure Switch User Manual
All SMC ZSE2 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I set the pressure range for the ZSE20(F) model?
Select the measurement mode in the configuration menu and choose the appropriate pressure range (‑100 kPa to 100 kPa) for the ZSE20(F) model.
From: SMC ZSE20(F) ISE20 Digital Pressure Switch User Manual
What are the maximum output voltage and current specifications?
The device can output up to 28 V with a maximum current of 80 mA for both NPN and PNP output types.
From: SMC ZSE20(F) ISE20 Digital Pressure Switch User Manual
What is the intended use of the compact pressure switch?
The compact pressure switch is intended to measure, monitor, and display pressure and provide an output signal.
From: SMC ZSE1 / ISE1(L) / ZSE2 / ISE2(L) Compact Pressure Switch Instruction Manual
What is the mounting tightening torque for the pressure switch?
The switch tightening torque is 7 to 9 N•m.
From: SMC ZSE1 / ISE1(L) / ZSE2 / ISE2(L) Compact Pressure Switch Instruction Manual
What is the intended use of the ZSE20(F)/ISE20 pressure switch?
It is intended to measure, monitor and display pressure and provide an output signal.
From: SMC ZSE20(F)/ISE20 High Precision Digital Pressure Switch Instruction Manual
What supply voltage does the switch require?
12 to 24 VDC (±10%), with maximum ripple of 10% (p-p).
From: SMC ZSE20(F)/ISE20 High Precision Digital Pressure Switch Instruction Manual
