Key facts
- Brand
- Silicon Laboratories
- Model
- C8051F300
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2012-05-10
Start here
Silicon Laboratories C8051F300/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Handbook
The C8051F30x family combines a high‑speed 8051‑compatible core with a rich set of analog and digital peripherals. It includes an 8‑bit ADC (F300/2 only) up to 500 ksps, a 10‑bit ADC at 200 ksps, programmable amplifiers, temperature sensor, voltage comparator, UART, SMBus, and a programmable counter array. The devices operate from 2.7 V to 3.6 V and support in‑system programming via ISP flash.
The handbook describes the on‑chip debug circuitry, power‑management modes (idle, stop), flash programming procedures, oscillator options, and peripheral configuration. It also provides pin‑out and package information, electrical characteristics, and contact details for Silicon Laboratories support.
Silicon Laboratories C8051F300 specifications
| Supply Voltage | 2.7 to 3.6 V |
|---|---|
| Typical Operating Current | 5 mA @ 25 MHz |
| Typical Stop Mode Current | 0.1 µA |
| Operating Temperature Range | ‑40 to +85 °C |
| 8‑bit ADC Sample Rate | Up to 500 ksps (F300/2 only) |
| 10‑bit ADC Sample Rate | 200 ksps |
| Internal Oscillator Frequency | 24.5 MHz ±2% |
| Flash Memory Size | Up to 8 kB (512‑byte sectors) |
| SRAM | 256 bytes |
Source: Silicon Laboratories C8051F300/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Handbook
All Silicon Laboratories C8051F300 documents by type
Instruction set, parameters and examples for configuring or programming the device.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What supply voltage range does the C8051F30x support?
The device operates from 2.7 V to 3.6 V.
From: Silicon Laboratories C8051F300/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Handbook
How much current does the MCU draw during typical operation?
Typical operating current is 5 mA when running at 25 MHz.
From: Silicon Laboratories C8051F300/1/2/3/4/5 Mixed Signal ISP Flash MCU Family Handbook
What is the supply voltage range for the C8051F300?
The C8051F300 operates from 2.7 V to 3.6 V.
From: SILICON LABORATORIES C8051F300 25 MIPS 8 kB Flash 8-Bit ADC 11-Pin Mixed-Signal MCU handbook
How much flash memory does the C8051F300 have?
It includes 8 kB of flash memory.
From: SILICON LABORATORIES C8051F300 25 MIPS 8 kB Flash 8-Bit ADC 11-Pin Mixed-Signal MCU handbook