Key facts
- Brand
- SEW
- Model
- MOVITRAC 31..
- Category
- Industrial Robot
- Documents
- 11
- Languages
- EN
- Last added
- 2012-08-07
Start here
SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter Fieldbus Unit Profile Manual
This User Manual provides instructions for installing and commissioning SEW-EURODRIVE MOVITRAC 31.. frequency inverters equipped with fieldbus option PCBs. It details the operation of the inverter when connected to higher-level automation systems through standardized serial bus systems such as PROFIBUS-DP, PROFIBUS-FMS, and INTERBUS-S.
The document covers all relevant fieldbus parameters, various control concepts, and potential applications illustrated with program examples in both graphic form and Simatic-S5 syntax. It also includes procedures for setting inverter parameters via the fieldbus interface and diagnosis methods using fieldbus monitor parameters.
SEW MOVITRAC 31.. specifications
| Simultaneous real-time tracing channels | 4 measured variables (4 channels) |
|---|---|
| Variable sampling time range | 1ms to 1s |
| Recording depth per channel | max. 2048 sampled data points |
| Minimum PC CPU | 80386 processor |
| Minimum RAM | 570K |
| Disk drive requirement | 3.5" disk drive (1.44MB) |
| Hard disk space requirement | approx. 2MB free |
| Operating system | MS-DOS V5.0 or higher |
Source: SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter MC_SCOPE V1.10 Software Manual
All SEW MOVITRAC 31.. documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
- SEW-EURODRIVE MOVITRAC 31.. PROFIBUS Fieldbus Interface User Manual 63 p
- SEW-EURODRIVE MC_SHELL MOVITRAC 31C Frequency Inverter Software User Manual 19 p
- SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter MC_SCOPE V1.10 Software Manual 35 p
- SEW MOVITRAC 31.. Frequency Inverters INTERBUS Fieldbus Interface (FFI31.. option size 0/INTERBUS) Manual 31 p
- SEW-EURODRIVE MOVITRAC 31 FRS 31 Synchronous Operation Control Manual 19 p
- SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter Fieldbus Unit Profile Manual 78 p
- SEW MOVITRAC 31.. Frequency Inverter Communications Interfaces and Parameter List 37 p
- SEW MOVITRAC 31C...-503-4-01 Frequency Inverters Manual Special Version for Crane Control 25 p
- SEW MOVITRAC 31CmakeuseMOVITRAC B transform manual 30 p
Questions answered in these manuals
What is the purpose of the PROFIBUS-FMS interface on this inverter?
It is mainly used for visualization and parameter adjustment of drives because it allows larger, non-time-critical amounts of data to be exchanged.
From: SEW-EURODRIVE MOVITRAC 31.. PROFIBUS Fieldbus Interface User Manual
What are the hardware requirements for running MC_SHELL?
The system requires a PC/AT with an 80286-CPU or better, DOS version 3.3 or later, minimum 640 kbyte memory, and a VGA-compatible graphics card.
From: SEW-EURODRIVE MC_SHELL MOVITRAC 31C Frequency Inverter Software User Manual
How do you connect the frequency inverter to the PC?
Connect the MOVITRAC 31C and the PC together using a commercially available shielded serial interface cable.
From: SEW-EURODRIVE MC_SHELL MOVITRAC 31C Frequency Inverter Software User Manual
What is the maximum recording depth per channel?
The maximum recording depth is 2048 sampled data points per measured value channel.
From: SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter MC_SCOPE V1.10 Software Manual
Can I record digital input and output signals?
Yes, MC_SCOPE offers the facility to record digital input and output signals from the inverter.
From: SEW-EURODRIVE MOVITRAC 31.. Frequency Inverter MC_SCOPE V1.10 Software Manual
What inverter models does this manual cover?
This manual covers the MOVITRAC 31.. frequency inverters with fieldbus options.