Key facts
- Brand
- Mercury
- Model
- MWB201S
- Category
- Other Electronics
- Industry
- Computers
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-10-14
Start here
Mercury MWB201S Wireless Bridge Kit User Manual
The Mercury MWB201S is a wireless bridge kit designed for connecting devices like IP cameras and routers. The kit includes a main bridge and a sub-bridge, along with power adapters and a Passive PoE injector. Installation involves securing the units, connecting power and LAN cables, and configuring the management interface via a web browser. This manual is written in Chinese.
Read onlineMercury MWB201S specifications
| Default IP Address (Main Bridge) | 192.168.1.251 |
|---|---|
| Default IP Address (Sub Bridge) | 192.168.1.252 |
| Default Subnet Mask | 255.255.255.0 |
| Default Gateway | 192.168.1.1 |
All Mercury MWB201S documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I pair the main and sub bridges?
Ensure both devices are in the correct mode (one main, one sub). Within 15 minutes, briefly press the RESET/WPS button on both devices until the LEDs flash in sequence. If the LEDs turn solid, pairing is successful.
How do I restore the device to factory settings?
Press and hold the RESET/WPS button for more than 3 seconds while the device is powered on. The system will reset and automatically restart.
How do I pair the main and sub bridges?
Ensure both devices are powered on, then short-press the RESET/WPS buttons on both units simultaneously within 15 minutes until the LEDs flash in sequence.
How do I restore the device to factory settings?
Press and hold the RESET/WPS button for more than 3 seconds while the device is powered on until the indicator flashes.