Key facts
- Brand
- Kemppi
- Model
- MR 200
- Documents
- 2
- Languages
- EN
- Last added
- 2023-10-18
Start here
Kemppi FastMig MR 200/MR 300 Operating Manual
The Kemppi FastMig MR 200 and MR 300 panels are designed for use with synergic power sources FastMig M 320, 420, or 520. The MR 200 panel mounts to the MXF 63 wire feeder, while the MR 300 panel is compatible with the MXF 65 and 67 wire feeders. The manual details the physical connection of the ribbon cable and securing the panel to the machine.
The document covers the functions of the control panel, including the ON/OFF button, displays for wire feed speed and welding current, and controls for MIG dynamics and MMA Arc Force. It explains how to select between air-cooled and liquid-cooled MIG guns, adjust welding parameters such as pre-gas time and creep start level, and manage setup codes. Additionally, it lists specific error codes and provides disposal instructions.
Kemppi MR 200 specifications
| Wire Feed Unit Compatibility | MXF 63 for MR 200, MXF 65 and 67 for MR 300 |
|---|---|
| Power Source Compatibility | FastMig M 320, 420 or 520 |
| Factory Setting for MIG Dynamics | 0 |
| Default Device Address | 3 |
All Kemppi MR 200 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What power sources are compatible with the MR 200 and MR 300 panels?
The panels are designed for use with FastMig M 320, 420, or 520 power sources.
How do I mount the MR 200 or MR 300 panel?
Place the bottom edge of the panel behind the securing clips, remove the fixing pin from the top edge, push the panel gently into place, and secure it with the provided clip (for MXF 65 only).
Which wire feeders are compatible with the MR 200 and MR 300 panels?
The MR 200 panel mounts to the MXF 63 wire feeder, and the MR 300 panel mounts to the MXF 65 and 67 wire feeders.
How do I select between air-cooled and liquid-cooled MIG guns?
Press buttons 3 and 5 simultaneously for more than 1 second. Pressing again toggles the selection between 'Gas' (air-cooled) and 'CooLEr' (liquid-cooled).