This manual contains important information on the use, maintenance and safety of your Kemppi product.
The Kemppi FastMig MR 200 and MR 300 panels are designed for use with synergic power sources FastMig M 320, 420, or 520. The MR 200 panel mounts to the MXF 63 wire feeder, while the MR 300 panel is compatible with the MXF 65 and 67 wire feeders. The manual details the physical connection of the ribbon cable and securing the panel to the machine.
The document covers the functions of the control panel, including the ON/OFF button, displays for wire feed speed and welding current, and controls for MIG dynamics and MMA Arc Force. It explains how to select between air-cooled and liquid-cooled MIG guns, adjust welding parameters such as pre-gas time and creep start level, and manage setup codes. Additionally, it lists specific error codes and provides disposal instructions.
| Compatible Power Sources | FastMig M 320, 420 or 520 |
|---|---|
| MR 200 Wire Feeder | MXF 63 |
| MR 300 Wire Feeders | MXF 65 and 67 |
| Pre Gas Time Range | 0.0 – 9.9 s |
| Post Gas Time Range | 0.0 – 9.9 s |
| Creep Start Level Range | 10 – 170% |
| Start Power Range | -9 ... +9 |
| Cable Length Range | 5 – 80m |
The MR 200 panel mounts to the MXF 63 wire feeder, and the MR 300 panel mounts to the MXF 65 and 67 wire feeders.
Press buttons 3 and 5 simultaneously for more than 1 second. Pressing again toggles the selection between 'Gas' (air-cooled) and 'CooLEr' (liquid-cooled).
It shows the remaining time for the WiseDemo licence, displayed as 3-h, 2-h, minutes, or seconds, or OFF if expired.