Key facts
- Brand
- Kemppi
- Model
- FastMig MR 200
- Documents
- 2
- Languages
- PT · EN
- Last added
- 2023-10-18
Start here
Kemppi FastMig MR 200/MR 300 Operating Manual
The Kemppi FastMig MR 200 and MR 300 panels are designed for use with synergic power sources FastMig M 320, 420, or 520. The MR 200 panel mounts to the MXF 63 wire feeder, while the MR 300 panel is compatible with the MXF 65 and 67 wire feeders. The manual details the physical connection of the ribbon cable and securing the panel to the machine.
The document covers the functions of the control panel, including the ON/OFF button, displays for wire feed speed and welding current, and controls for MIG dynamics and MMA Arc Force. It explains how to select between air-cooled and liquid-cooled MIG guns, adjust welding parameters such as pre-gas time and creep start level, and manage setup codes. Additionally, it lists specific error codes and provides disposal instructions.
Kemppi FastMig MR 200 specifications
| Compatible Power Sources | FastMig M 320, 420 or 520 |
|---|---|
| MR 200 Wire Feeder | MXF 63 |
| MR 300 Wire Feeders | MXF 65 and 67 |
| Pre Gas Time Range | 0.0 – 9.9 s |
| Post Gas Time Range | 0.0 – 9.9 s |
| Creep Start Level Range | 10 – 170% |
| Start Power Range | -9 ... +9 |
| Cable Length Range | 5 – 80m |
All Kemppi FastMig MR 200 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What power sources are the FastMig MR 200 and MR 300 panels designed to work with?
The panels must be used only with FastMig M 320, 420, or 520 power sources.
Which feeders are compatible with the MR 200 and MR 300 panels?
The MR 200 panel fits the MXF 63 feeder, and the MR 300 fits the MXF 65 and MXF 67 feeders.
Which wire feeders are compatible with the MR 200 and MR 300 panels?
The MR 200 panel mounts to the MXF 63 wire feeder, and the MR 300 panel mounts to the MXF 65 and 67 wire feeders.
How do I select between air-cooled and liquid-cooled MIG guns?
Press buttons 3 and 5 simultaneously for more than 1 second. Pressing again toggles the selection between 'Gas' (air-cooled) and 'CooLEr' (liquid-cooled).