Key facts
- Brand
- icpdas
- Model
- M-7005
- Category
- Industrial Robot
- Industry
- Industrial
- Documents
- 3
- Languages
- EN
- Last added
- 2023-10-12
Start here
I-7005 and M-7005 User’s Manual
The ICP DAS 1-7005 and M-7005 are network data acquisition and control modules featuring 8-channel thermistor input and 6-channel digital output capabilities. These modules support a 24-bit sigma-delta ADC for high accuracy and allow direct thermistor connection with software calibration options. Communication with the host is handled via an ASCII format over an RS-485 bi-directional serial bus with programmable baud rates up to 115.2 Kbps.
The manual provides detailed instructions on terminal assignments, wiring recommendations, and default settings. It includes comprehensive guides for the proprietary DCON protocol and the standard Modbus RTU protocol, detailing specific commands for reading digital output status, input status, and configuring module settings. Additionally, the document covers troubleshooting steps, mounting options (DIN-rail, piggyback, wall), and technical support information.
ICP DAS M-7005 specifications
| Input Channels | 8 |
|---|---|
| Input Type | Thermistor |
| Sampling Rate | 8 samples/sec |
| Bandwidth | 5.24 Hz |
| Accuracy | ±0.1% |
| Output Channels | 6 |
| Output Type | Open collector |
| Output Load | 30 V, 100 mA max. |
| Power Requirement | +10 to +30 VDC |
| Consumption | 1.1 W |
| Operating Temperature | -25°C to +75°C |
| Maximum Resistance | 180000 ohms |
All ICP DAS M-7005 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the maximum transmission speed?
Transmission speeds of up to 115.2 Kbps can be selected via software programming.
How long is the recommended warm-up period?
A warm-up period of 30 minutes is recommended to achieve complete performance results.
What is the maximum resistance that can be measured?
The maximum resistance is 180,000 ohms for firmware version A2.3 and earlier, and 204,800 ohms for firmware version A3.7 and later.
What is the maximum resistance the 1-7005 and M-7005 can measure?
The maximum resistance that can be measured is 180000 ohms for firmware version A2.3 and earlier, and 204800 ohms for firmware version A3.7 and later.
What is the maximum transmission speed for the modules?
Transmission speeds of up to 115.2 Kbps can be selected.
What is the recommended warm-up period for the modules?
A warm-up period of 30 minutes is recommended to achieve complete performance results.