User guide for the TI MSP430 IEC60730 software package for F5xx, FR57xx, G23xx, G24xx, G25xx, G2x44, and G2x55 devices.
This guide describes the Texas Instruments MSP430 IEC60730 software package, which provides system tests for IEC 60730-1:2010 requirements up to Class B products. It covers example projects, power-on and periodic self-tests, and integration of those tests into an application design.
The document also explains how to generate CRC-CCITT checksums, start new projects in Code Composer Studio or IAR, run ADC, CPU register, clock, memory, GPIO, and program counter tests, and use the configuration tool to generate customized header files.
| Supported tool chains | Texas Instruments Code Composer Studio v5.3 or later; IAR Embedded Workbench v5.51.3 or later |
|---|---|
| Default main clock frequency | 12 MHz |
| Default percent frequency drift | +/-3% |
| Default RAM test | March X algorithm in non-destructive mode |
| Default stack size | 80 Bytes |
| Default ADC count drift limits | -50 and 50 |
| CRC checksum location for MSP430G2553 | Information memory (0x1004) |
| CRC checksum location for MSP430F5529 | Beginning of Info D section (0x1800) |
| CRC checksum location for MSP430FR5739 | Beginning of Info A section (0x1880) |
The package provides system tests required by IEC 60730-1:2010 for up to Class B products.
They toggle the FAILURE pin a number of times to indicate which test failed, and the SUCCESS pin remains set if none of the tests failed.
It is a user-defined function that needs to ensure the application shuts down gracefully.
Texas Instruments Code Composer Studio v5.3 or later and IAR Embedded Workbench v5.51.3 or later.