TI TMS320F2812 DSP and TFT3224BS-3.5 LCD Module Application Note

Application note on connecting a TMS320F2812 DSP to a TFT3224BS-3.5 LCD module in handheld instruments, covering the hardware interface and C software.


TI TMS320F2812 DSP and TFT3224BS-3.5 LCD Module Application Note - cover page
Brand
TI
Category
Processors
Document type
Application Note
Language
Chinese
Pages
8
File format
PDF
File size
235 KB
Published
08 November, 2026
Updated
08 November, 2026
MD5 checksum
19CCC381FC289D32D347FA2FCE7AE8F0

About this manual

This article, published in the October 2008 issue of Advanced Display (现代显示, issue 93), describes how a TI TMS320F2812 DSP is used to control a TFT3224BS-3.5 color LCD module in a handheld instrument. It outlines the system blocks: signal sampling and conditioning, A/D data acquisition, DSP data processing, the LCD display, and communication and key modules, with the collected data processed by FFT and harmonic analysis before being sent to the display.

The document then lists the main features of the TMS320F2812 and the characteristics of the TFT3224BS-3.5 module, gives the module pin assignment table and its display logic functions, and shows the interface circuit that connects the DSP data, address and control lines directly to the LCD. A software section describes the initialization and display flow and explains how Chinese character and graphic data are generated and shown using C-language routines. This manual is written in Chinese.

What's inside

  • System overview
  • TMS320F2812 features
  • TFT3224BS-3.5 LCD module overview
  • LCD module pin assignment
  • Display logic functions
  • DSP to LCD hardware interface
  • Software design flow
  • Chinese character display

Specifications

Execution speed150 MIPS
Instruction cycle6.67 ns
CPU core32-bit fixed-point DSP
On-chip memory36 k x 8 bit, 128k FLASH
ADC12-bit, 16 channels, 80 ns fastest conversion
Display size and resolution3.5 in true-color TFT, 320x240, 256 colors
Module interfaceParallel bus with 8 data lines
Logic level compatibility3.3 V and 5 V
Full-screen clear time16.6 ms

Frequently asked questions

Which DSP is used to control the LCD module?

The display is controlled by a TI TMS320F2812, a 32-bit fixed-point DSP with 150 MIPS execution speed.

Does the DSP-to-LCD interface need level conversion circuits?

No. All interface signals are compatible with both 3.3 V and 5 V logic, so they can be connected directly without any level conversion circuit.

What are the specifications of the TFT3224BS-3.5 display?

It is a 3.5-inch true-color TFT screen with 320x240 resolution that supports 256 colors and has a touch screen.

How are Chinese characters prepared for display?

A font extraction software is used to enter the character and select C51 or A51 mode, and the generated source code is stored in an array for the display subroutine to read.

Download PDF (235 KB)

More TI Manuals


View all TI manuals →