Technical data sheet for Siemens RAB11 and RAB11.1 room thermostats for 2-pipe fan coils with 2-position control and a manual 3-speed fan switch.
The Siemens RAB11... room thermostat (document CE1N3015en, Building Technologies) is used in heating or cooling systems to maintain the selected room temperature, typically in commercial buildings, residential buildings and light industrial buildings. It works together with zone valves, thermal valves and fans. Control is 2-position with a gas-filled diaphragm; the heating or cooling mode is chosen with a manual switch on the unit front, and the fan speed is set with a manual 3-speed fan switch. Two types are covered: RAB11 for 2-pipe fan coils with 3-speed fan and manual changeover, and RAB11.1, which adds a ventilation function.
The document contains the type summary, equipment combinations with actuators and accessories such as adapter plates, notes on mounting, installation and commissioning, ordering information, technical data, a connection diagram and dimensions. Stated data include a setpoint setting range of 8…30 °C, a switching voltage of AC 250 V, a switching capacity of 0.2…6(2) A for the control output and the fan outputs, a housing degree of protection of IP30 and a weight of 0.14 kg.
| Switching voltage | AC 250 V |
|---|---|
| Switching capacity, control output Y / fan Q1, Q2, Q3 | 0.2…6(2) A at AC 250 V / 50 or 60 Hz |
| Setpoint setting range | 8…30 °C |
| Switching differential | 1 K (d1) |
| Operating temperature | 0…+50 °C (class 3K5) |
| Transport / storage temperature | -20…+50 °C |
| Degree of protection of housing | IP30 to EN 60529 |
| Weight | 0.14 kg |
| Colour | white, NCS S 0502-G (RAL 9003) |
| Terminals | Screw terminals for 2 x 1.5 mm² (min. 0.5 mm²) |
It is used in heating or cooling systems to maintain the selected room temperature, typically in commercial, residential and light industrial buildings.
The setpoint setting range is 8…30 °C and is selected with the setting knob on the front; it can be mechanically limited by a setpoint limiter under the unit cover.
RAB11.1 is the 2-pipe fan coil room thermostat with 3-speed fan, manual changeover and an additional ventilation function.
Mounting height is about 1.5 m above the floor, on a flat wall where the room temperature can be acquired accurately.