This guide explains how to configure Siemens CP343-1 and CP443-1 Ethernet modules for Modbus TCP communication in STEP7.
The document provides a complete overview of Modbus TCP communication using Siemens S7‑300/400 PLCs equipped with the CP343‑1 or CP443‑1 Ethernet modules. It describes the protocol basics, required software and hardware, and the steps to set up the modules as either a Modbus TCP server or client.
Detailed configuration procedures are given, including hardware configuration, adding TCP connections, example projects, testing with Modscan32/Modsim32, and licensing notes. The guide also lists related reference links for further information. This manual is written in Chinese.
| Default Modbus TCP server port | 502 |
|---|---|
| Suggested client port range | 2000+ |
| Supported protocols on CP343-1 | Modbus TCP, PROFINET, TCP/IP, S7 |
| Number of TCP connections supported | Depends on module; each client requires unique parameters |
Create a new TCP connection in the hardware configuration, set the local connection ID to 1, select the module as server, and leave “Active connection establishment” unchecked.
The default port is 502.
In addition to Modbus TCP, the module can run PROFINET, TCP/IP, and S7 protocols.