Device manual for the Siemens SIMATIC ET 200S digital electronic module 2DO DC24V/0.5A ST (6ES7132-4BB01-0AA0), covering properties, technical data and LED…
This device manual is a supplement to the 'ET 200S Distributed I/O System' operating instructions and describes the SIMATIC ET 200S digital electronic module 2DO DC24V/0.5A ST (order number 6ES7132-4BB01-0AA0). It is intended to help qualified personnel commission the ET 200S system; general knowledge of automation engineering is assumed.
The manual covers the module's properties, terminal assignments, compatible terminal modules, a block diagram, technical data, and diagnostics using the LED display. It also lists Siemens support contacts, training centers, and notes on environmentally sound recycling and disposal of the module. This manual is written in Chinese.
| Outputs | 2 digital outputs, 0.5 A per output |
|---|---|
| Rated load voltage | 24 VDC |
| Extended temperature range (vertical mounting) | 0 to 55 °C |
| Width | 15 mm |
| Weight | approx. 40 g |
| Total output current per module | 1 A |
| Cable length (unshielded / shielded) | max. 600 m / max. 1,000 m |
| Address space | 1 byte (2 bits packaged) |
| Power loss of module | typically 0.4 W |
| Insulation test | 500 VDC |
| Output delay (resistive load) | max. 200 µs (0→1), max. 1.3 ms (1→0) |
| Load resistance range | 48 Ω to 3.4 kΩ |
| Lamp load | max. 5 W |
| Status display | green LED per channel |
It is suitable for solenoid valves, DC contactors and indicator lamps.
Each channel has a green LED: when it lights up, the output on that channel (channel 0 or channel 1) is activated.
Spring-terminal, screw-type and fast-connection terminal modules such as TM-E15C26-A1 (6ES7193-4CA50-0AA0), TM-E15S24-A1 (6ES7193-4CA20-0AA0) and TM-E15N23-01 (6ES7193-4CB60-0AA0) can be used.
No, the module does not support synchronous (isochronous) operation.