Seagate Barracuda LP Series SATA Hard Drive Product Manual (ST32000542AS, ST31500541AS, ST31000520AS)

Product manual for Seagate Barracuda LP Series SATA hard drives, covering specifications, power requirements, mounting, and the SATA interface.


Seagate Barracuda LP Series SATA Hard Drive Product Manual (ST32000542AS, ST31500541AS, ST31000520AS) - cover page
Brand
Seagate
Category
Hard disk
Document type
User Manual
Language
English
Pages
48
File format
PDF
File size
589 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
9DFEF267A78D910DC60BA0479EBB72BD

About this manual

This product manual from Seagate Technology LLC describes the functional, mechanical and interface specifications for the Barracuda LP Series SATA drives, models ST32000542AS (2000GB), ST31500541AS (1500GB) and ST31000520AS (1000GB). It covers drive specifications such as capacity, spindle speed, power consumption, environmental limits and acoustics, plus warranty and agency certification information.

The manual also explains how to configure and mount the drive, including handling and static-discharge precautions, SATA cables and connectors, and drive mounting dimensions. A section on the Serial ATA interface covers hot-plug compatibility, connector pin definitions and supported ATA commands, including Identify Device, Set Features and S.M.A.R.T. commands.

What's inside

  • Introduction
  • About the Serial ATA interface
  • Drive Specifications
  • Power specifications
  • Environmental specifications
  • Acoustics
  • Warranty
  • Configuring and Mounting the Drive
  • Serial ATA (SATA) Interface
  • Seagate Technology Support Services

Specifications

Formatted capacity2000GB / 1500GB / 1000GB (512 bytes per sector)
Spindle speed5900 RPM
Cache buffer32MB
I/O data-transfer rate (max.)300MB/s
Sustained data transfer rate OD (max.)95MB/s
Height (max)26.1mm / 1.028 in
Operating temperature0° to 60°C (drive case temperature)
Voltage tolerance5V ± 5%, 12V ± 10%
Average latency5.1ms
Operational shock (1000GB model, max)70 Gs at 2ms

Frequently asked questions

Do Barracuda LP Series SATA drives require jumper settings for installation?

No. The Serial ATA interface provides plug-and-play connectivity, so no jumpers or other configuration options need to be set.

What cache buffer size do these drives have?

The Barracuda LP Series drives have a 32MB cache buffer.

Do the drives support S.M.A.R.T. monitoring?

Yes, the drives support S.M.A.R.T. drive monitoring and reporting.

What spindle speed do the Barracuda LP Series drives use?

The drives use a 5900 RPM spindle speed.

Download PDF (589 KB)

More Seagate Manuals


View all Seagate manuals →