User's manual for the SCS P4dragon 2nd generation Automatic Link Establishment (ALE) features in firmware 2.40.00_ALE, covering configuration and operation.
This manual describes the special 2nd generation (2G) Automatic Link Establishment (ALE) features of the SCS P4dragon DR-7x00 modem, introduced with firmware version 2.40.00_ALE (08/2021). Firmware 2.40 replaces firmware 2.30 as the P4dragon operational firmware and adds new 2G ALE features based on MIL-STD-188-141D, Appendix A requirements, in addition to all PACTOR features.
The manual explains how the modem's ALE controller scans user-configured HF frequencies, transmits and evaluates soundings, and stores Link Quality Analysis (LQA) data to select the best channel for connections. It covers basic ALE terms (AMD, LQA, MY, NET, OTHER, OWN, SOUNDING), combined ALE/PACTOR operation, transceiver remote control requirements, baud rate versus scan rate considerations, and the FSKA parameter for ALE transmit audio level. Permanent use of the 2G ALE features requires a FEATURE LICENSE from SCS; 100 ALE links are available without a license, added with the FLICENSE command.
| Firmware version | 2.40.00_ALE (08/2021) |
|---|---|
| ALE standard | MIL-STD-188-141D, Appendix A |
| Minimum baud rate for 1 channel/second scanning | 2400 baud |
| Minimum baud rate for 2 channels/second scanning | 4800 baud |
| Minimum baud rate for 5 channels/second scanning | 9600 baud |
| AMD message length | up to 90 characters |
| ALE callsign length | up to 15 characters (3 or 6 characters recommended) |
| PACTOR callsign limit | 8 characters maximum |
| ALE links without feature license | 100 |
Yes, permanent use of the 2G ALE features requires a FEATURE LICENSE from SCS. Without a license, 100 ALE links are available; the FLICENSE command adds a purchased license to the DR-7x00 modem.
Yes, unlike stand-alone PACTOR operation, ALE or ALE/PACTOR operation requires Transceiver Remote Control, configured with the "trx" command before activating ALE scanning.
The FSKA parameter defines ALE waveform transmit levels, since all 2nd generation ALE transmissions use 8-FSK waveforms.
Standard PACTOR calls are wrapped by the ALE controller, which first uses ALE to call and connect to the target channel before performing the follow-on PACTOR connect. This automatic wrapping can be disabled with the ALE AUTOALE command.