Instructions for the RIDGID 00-R, 12-R and 11-R manual pipe threaders, covering inspection, pipe preparation, threading, and cleanup.
The RIDGID 00-R, 12-R and 11-R threaders are designed to thread pipe or conduit using individual die heads for each size of pipe and a manually operated ratchet. The instructions cover inspecting the threader, mounting the pipe in a pipe vise, cutting the end squarely, reaming burrs, selecting and inserting the die head, slipping the pipe guide over the pipe, ensuring the ratchet pawl is engaged, and applying RIDGID Thread Cutting Oil.
Threading stops when the ends of the dies are flush with the pipe end; the die head is backed off by reversing the ratchet mechanism. The document also notes cleaning oil spills, cleaning and storing the threader in a clean dry area, and contacting RIDGID Technical Service with questions.
| Application | Threading pipe or conduit |
|---|---|
| Threading method | Manually operated ratchet |
| Cutting oil | RIDGID Thread Cutting Oil |
Use a generous quantity of RIDGID Thread Cutting Oil when threading.
Stop when the ends of the dies are flush with the end of the pipe.
Reverse the ratchet mechanism and turn the die head in the opposite direction.
Contact the RIDGID Technical Service Department at 1-800-519-3456 or email [email protected].