Official installation guide for Rain Bird DV and DVF solenoid valves covering connection, wiring, operation, and troubleshooting.
This document provides step-by-step instructions for installing Rain Bird DV and DVF valves. It covers preparing the system with water supply and pressure regulators, connecting adapters to threaded or slip models, and attaching the valve to pipes using solvent cement or polyethylene clamps.
The guide also details electrical wiring requirements, including common wire connections and power leads to the controller. Additionally, it explains how to operate valves manually for flushing and flow control, along with a troubleshooting section for issues like water hammer or valves that will not shut off.
| Max Flow (Male x Male/Barb) | 30 GPM (6.8 m³/h or 1.9 l/s) |
|---|---|
| Operating Pressure | 15 - 150 psi (1 - 10 Bars) |
Use the solenoid handle, which is designed to shut the valve off completely and keep it from weeping.
Install a pressure regulator on the line before the valve to reduce water pressure.
Turn the bleed screw counterclockwise two turns to open the external bleed.