Operating manual for the Oriental Motor HP-P026-2 PKP Series 2-phase stepping motor, covering safety precautions, installation, wiring, and load limits.
The HP-P026-2 operating manual covers the Oriental Motor PKP Series 2-phase stepping motor. It explains safety precautions, package contents, installation conditions, mounting, wiring, permissible overhung and thrust loads, load connection, and motor connectors and cables.
The document states that the motor is designed for general industrial machinery and requires a DC power supply with reinforced insulation. Installation must be indoors inside an enclosure with vent holes, at an ambient temperature of –10 °C to +50 °C and humidity of 85% maximum, non-condensing.
| Operating ambient temperature | –10 °C to +50 °C (+14 °F to +122 °F), non-freezing |
|---|---|
| Operating ambient humidity | 85% maximum, non-condensing |
| RoHS compliance | Compliant with RoHS (Directive 2002/95/EC, 27 Jan. 2003) |
| Motor cable length | 0.6 m (2 ft.) |
| Encoder cable length | 0.6 m (2 ft.), PKP2□-L only |
| Permissible overhung load, PKP26 at 0 mm from shaft top | 61 N (13.7 lb.) |
The motor can be installed where the operating ambient temperature is –10 °C to +50 °C (+14 °F to +122 °F), non-freezing.
Use a DC power supply with reinforced insulation on its primary and secondary sides.
No. The manual says not to use the product in explosive or corrosive environments, in the presence of flammable gases, locations subjected to splashing water, or near combustibles.
Stop running and turn off the driver power.