Installation and operation manual for the Oasis I Series inverter pool heat pump, covering setup, controller use, troubleshooting, wiring and warranty.
The Oasis I Series inverter pool heat pump provides heating and cooling, uses R32 refrigerant, and has an LCD touchscreen controller, built-in timers, automatic defrost, and horizontal front discharge airflow. The manual covers installation, initial start-up and commissioning, controller functions, troubleshooting, wiring diagrams, parameter list, maintenance and warranty.
The document includes performance data and dimensions for the heat pump units, a quick start guide, plumbing and electrical connection instructions, controller operation, fault tables, cable specifications, and warranty details.
| Refrigerant | R32 |
|---|---|
| Nominal heating capacity | 28.0 kW / 34.0 kW (by 50 Hz) |
| Power supply | 230V~/50Hz or 380V/3N~/50Hz |
| Water connection | 40 mm |
| Water flow volume | 8.6 / 10.0 m³/h |
| Noise level | 46-57 dB(A) / 48-58 dB(A) |
| Net weight | 111 kg / 120 kg |
| Unit net dimensions (L x W x H) | 1161 x 470 x 1274 mm |
| Minimum operating air temperature | Guaranteed stable performance from -7°C air |
It uses R32 refrigerant.
E03 indicates no water flow; the unit automatically turns off and restarts once water flow is reinstated.
The standard plumbing fitting accepts 40mm NB PVC pipe for connection to the pool or spa filtration plumbing.
Adjust the 3-way valve at the cold-water inlet to achieve a target temperature differential of approximately 2°C.