Nitecore EC21 flashlight user manual covering the 460-lumen CREE XP-G2 LED light's modes, battery options, dimensions, runtime and warranty.
The Nitecore EC21 is a handheld flashlight that uses a CREE XP-G2 (R5) LED with a maximum output of 460 lumens, a peak beam intensity of 9400 cd and a throw distance of up to 194 meters. It has a dual-switch design with an ON/OFF button and a MODE button, a secondary red LED for constant or flashing illumination, and it indicates battery voltage with a red flashing LED. The body is made of aero grade aluminum alloy with HAIII military grade hard-anodized finish, is waterproof to IPX-8 (2 meters submersible) and impact resistant to 1.5 meters.
This user manual describes the flashlight's features and dimensions, then explains operation: instant ultra-low and turbo output, red light and signal light modes, strobe, location beacon and SOS modes, strobe ready, lockout and unlock, standby mode, brightness levels, and battery installation with one 18650 or two CR123 batteries. It also covers the power tips for reading battery voltage, the output and runtime table measured to ANSI/NEMA FL1, maintenance advice, the list of accessories and the warranty service terms.
| LED | CREE XP-G2 (R5) |
|---|---|
| Maximum output | 460 lumens |
| Peak beam intensity | 9400 cd |
| Beam distance | up to 194 meters |
| Maximum runtime | up to 430 hours |
| Length | 4.25” (108mm) |
| Head diameter | 1” (25.4mm) |
| Weight | 2.10oz (59.5 gram) without battery |
| Waterproof rating | IPX-8, 2 meters submersible |
| Impact resistance | 1.5 meters |
| Battery options | 1 x 18650 (3.7V 2600mAh) or 2 x CR123 (3V 1700mAh) |
With the light switched off, press and hold the MODE button for more than one second to access turbo mode at 460 lumens.
It accepts two CR123 batteries or one 18650 battery; the positive end must point towards the head.
With the light switched on, press and hold the ON/OFF button and the MODE button simultaneously for over one second; repeat the same press to exit lockout.
After the 15-day exchange period, defective products are repaired free of charge for 60 months (5 years) from the date of purchase.
Replace or recharge the batteries when output appears to be dim or the flashlight becomes unresponsive.