This is a user manual for the NITECORE FX1 charger. The charger has the following features: 1. Compatible with multiple battery types, including Li-ion, Ni-MH and Ni-Cd batteries. 2. Has multiple charging modes, including standard charging, fast charging and trickle charging. 3. Has multiple safety features, such as overcharge protection, over-discharge protection and short circuit protection.
The NITECORE FX1 is a USB-powered charger that charges two Fujifilm NP-W126/NP-W126S camera batteries at the same time. The manual lists its features — real-time information on battery charge, battery voltage, charging current, battery temperature, charged volume and battery health, automatic battery health detection, reverse polarity and anti-short circuit protection, automatic selection between CC and CV charging modes, automatic termination when charging is complete, and compatibility with power banks, 5V solar panels and USB adapters.
The manual then explains operation: the output current is adjusted automatically up to 1000 mA according to the power supplied by the USB source, an initial low-current test shows battery status as Good, Normal or Poor, mechanical reverse polarity protection blocks incorrect insertion, and over-discharged batteries with a protective circuit are activated automatically. It ends with 15 cautions, a disclaimer and warranty details covering 15-day replacement of defective products, 12 months of free repair and a limited warranty after that.
| Input | DC 5V 2A |
|---|---|
| Output current | 1000 mA (max) |
| Input interface | USB |
| Battery compatibility | Fujifilm NP-W126 / NP-W126S |
| Dimensions | 85 x 50 x 25.5 mm (3.35 x 1.97 x 1 in) |
| Weight | 58 g (2.05 oz) |
| Operating temperature | -10 to 40 °C |
| Storage temperature | -20 to 60 °C |
It is only compatible with Fujifilm NP-W126/NP-W126S camera batteries, and it charges batteries in both slots simultaneously. Other batteries must not be charged.
The output current is adjusted according to the actual power supplied by the USB source, up to a maximum of 1000 mA.
When a battery is inserted, the FX1 performs an initial low-current test charge to diagnose it, then shows the battery status as Good, Normal or Poor.
Defective products can be exchanged within 15 days of purchase, and malfunctioning products can be repaired free of charge for 12 months from the date of purchase.