Installation instructions for the MS SEDCO DB11 recess mounted safety beam, covering wiring, time delay adjustment, specifications and warranty.
The DB11 is a recess mounted safety beam designed to be installed inside a door frame, with separate transmitter and receiver units. The guide covers wiring connections through the supplied molex harness, setting the input voltage, adjusting the relay time delay, and mounting dimensions.
The document also lists product specifications, explains how to diagnose arcing caused by a grounded transformer secondary, and states the one-year warranty offered by MS SEDCO.
| Range | 0 to 40 feet |
|---|---|
| Power | 12V to 24V AC or DC, 100mA |
| Relay Output | Form C (N.O. or N.C.) |
| Output Rating | 1 Amp at 125V AC |
| Operating Temperature | 0°F to 140°F (32°C to 60°C) |
| Time Delay | 0.5 to 5 seconds |
| Finish | Anodized clear and dark bronze aluminum |
The DB11 operates on 12V or 24V AC or DC; the red wire is used for 12V and the white wire for 24V.
Remove the two screws on the rear of the receiver to access the delay potentiometer, then turn it with a small flat blade screwdriver; clockwise increases the delay and counterclockwise decreases it.
The relay contacts change state if the beam is interrupted or if power is lost to either the transmitter or the receiver.
MS SEDCO guarantees the DB11 to be free from manufacturing defects for one year from the date of shipment.