Mitsubishi Electric AC121SA02 TFT-LCD Module Technical Specification

Technical specification for the Mitsubishi Electric AC121SA02 12.1-inch SVGA color TFT-LCD module with LED backlight and LVDS interface.


Mitsubishi Electric AC121SA02 TFT-LCD Module Technical Specification - cover page
Brand
Mitsubishi Electric
Category
Other Electronics
Document type
Datasheet
Language
English
Pages
25
File format
PDF
File size
601 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
26B2480852FCD2515FBA45FF327DD021

About this manual

This technical specification from Mitsubishi Electric covers the AC121SA02, a 12.1-inch SVGA color TFT-LCD module built from an LCD panel, driver ICs, control circuit, LED driver and backlight unit. The module displays 800 x 600 images in 262k colors (6 bit/color) or 16.7M colors (8 bit/color) on a 246.0 x 184.5 mm display area, uses a 3.3 V LCD driving supply and transmits data and control signals over an LVDS interface at a typical 40 MHz clock.

General specifications are followed by sections on absolute maximum ratings, electrical characteristics for the LCD and the backlight, interface pin connections and ISP data mapping, interface timing, block diagram, mechanical specification, optical characteristics, reliability test conditions, other features and handling precautions for TFT-LCD modules. The document is marked tentative and states that all information is subject to change without notice.

What's inside

  • Application
  • Overview
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Interface Pin Connection
  • Interface Timing
  • Block Diagram
  • Mechanical Specification
  • Optical Characteristics
  • Reliability Test Condition

Specifications

Display Area246.0 (H) x 184.5 (V) mm, 12.1-inch diagonal
Number of Dots800 x 3 (H) x 600 (V)
Pixel Pitch0.3075 (H) x 0.3075 (V) mm
Number of Colors262k (6 bit/color), 16.7M (8 bit/color)
Luminance500 cd/m2
Viewing Angle (CR >= 10)80, 80 (H), 60, 80 (V)
Surface TreatmentAnti-glare and hard-coating 3H
Electrical InterfaceLVDS (6 bit/8 bit)
Module Size260.5 (W) x 203.0 (H) x 9.5 (D) mm
Module Mass580 g
Backlight UnitLED, edge-light, unreplaceable
Power Supply Voltages for LCD (VCC)3.0 min / 3.3 typ / 3.6 max V
Backlight Power Supply Input Voltage (VL)10.8 min / 12.0 typ / 13.2 max V
LED Life Time80,000 min / 100,000 typ h
Operation Temperature (Ambient)-30 to 80 °C

Frequently asked questions

What is the input power voltage for LCD driving?

The input power voltage is 3.3 V for LCD driving; the electrical characteristics give a range of 3.0 to 3.6 V for VCC.

What interface does the AC121SA02 use for data and control signals?

The data and control signals are digital and transmitted via an LVDS interface at a typical 40 MHz clock cycle. Both 6 bit and 8 bit input are supported.

What resolution and number of colors does the module display?

It displays 800 x 600 images in 262k colors with 6 bit data or 16.7M colors with 8 bit data.

Is the backlight replaceable?

No. The backlight unit is an LED edge-light that is listed as unreplaceable.

Does the module comply with RoHS?

Yes, this LCD module complies with the RoHS directive, and it is UL60950-1 certified (UL File# E194548).

Download PDF (601 KB)

More Mitsubishi Electric Manuals


View all Mitsubishi Electric manuals →